Installation Guide

OWNERS MANUAL
3
UNPACKING THE UNIT
1. FIRST, inspect the carton for damage: CAREFULLY DOCUMENT AND
PHOTOGRAGH ALL PERCEIVED DAMAGE. Report all damage claims to
customer service at 1-866-423-0800.
2. DO NOT LIFT THE TUB BY THE PLUMBING
. Doing so can result in leaks, for
which the installer is responsible. All Walk-In Tubs are water tested before they
leave our factory and the bathtub you have purchased has passed inspection.
3. Immediately inspect the unit for damage even if there is no carton damage. All
product damage must be reported within 72 hours of receipt from American
Standard®. Once the unit is installed, surface damages will be assumed to be
installation-related if not reported prior to installation. Installers are also responsible
for damage that occurs once the unit is placed in its niche.
NOTE: Remove all packaging material except for the protective plastic. This has
been placed on the tub at the factory to eliminate abrasions from handling. This
should only be removed at final clean up.
4. Inspect the plumbing for any fittings that may have loosened in transit.
5. Read the following instructions completely before installing this product. If the
home-owner or installer has any questions, please call us at 1-866-423-0800.
6. You must follow all the instructions in this manual.
FAILURE TO READ AND COMPLY WITH ALL INSTRUCTIONS CAN RESULT IN
PRODUCT DAMAGE OR INJURY TO BOTH INSTALLER AND HOMEOWNER. IT
WILL ALSO RESULT IN ASSUMPTION OF ALL LIABILITY BY SAID INSTALLER.