Dimensions Guide

LW-17
© 2011 AS America Inc.
9/11
CLEAN
™
CADET
®
3 SIPHONIC DUAL FLUSH
RIGHT HEIGHT
®
ELONGATED COMPLETE TOILET
VITREOUS CHINA
CLEAN
™
CADET
®
3 SIPHONIC DUAL FLUSH
RIGHT HEIGHT
®
ELONGATED COMPLETE TOILET
❑ 3381.216
•Vitreouschina
•Highefficiency,lowconsumption
 -FullFlush(6.0Lpf/1.6gpf)
 -PartialFlush(3.8Lpf/1.0gpf)
•Elongatedsiphonactionbowlwithdirect-fedjet
•16-1/2"Rimheightforaccessibleapplications
•EverClean
®
surface inhibits the growth of stain
and odor causing bacteria, mold and mildew
on the surface
•MeetsEPAWaterSense
®
criteria
•305mm(12")rough-in
•Fullyglazed2"Trapway
•PowerWash
®
rimscrubsbowlwithpressurized
water every ush
•Generous9"x8"watersurfacearea
•FeaturesNo Tools Installation. Everything
needed for toilet installation is included and
can be hand tightened
•Chromeplatedtopmountedpushbuttonactuator
•Sanitarybaronbowl
•2colormatchedboltcaps
•Color-matchedplastictoiletseatandcover
with EverClean
®
surface
•Waxringgasketwithclosetbolts
•100%factoryushtested
•Lifetimewarrantyonchinaware,10year
warranty on all mechanical parts, and 1 year
warranty on seat
Nominal Dimensions:
756x380x787mm
(29-3/4"x15"x31")
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.2-2008/CSAB45.1-08forVitreous
China Fixtures
•USEPAWaterSense
®
Specication for HET's
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM
DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
C/L OF SEAT POST HOLES
5-1/2" (140 mm) CENTERS
29-3/4"
(756 mm)
8-1/2"
(213 mm)
18-1/2"
(470 mm)
15"
(380 mm)
9-1/2"
(238 mm)
31"
(787 mm)
*
10"
(254 mm)
16-1/2"
(419 mm)
13-1/4"
(335 mm)
3/4"
(19 mm)
7"
(180 mm)
12"
(308 mm)
C/L OF OUTLET
FINISHED FLOOR
FINISHED WALL
3-5/8"
(92mm)
SUPPLY
AS
REQ'D
14"
(356 mm)
*
6"
(152 mm)
1" ± 1/4"
(25mm ± 6mm)
To Be Specied:
❏ Color: ❏ White
❏ Supply with stop:
Certified by
IAPMO R&T
No Tools
Installation