Specification
K2-2
© 2021 AS America Inc.
spec_250CA.104 Reliant EL 12in 01/21
Reliant
™
Elongated 12" Rough Toilet
❏ 250CA.104
• Combination bowl and tank, less seat
• High Efficiency Toilet (HET), ultra-low
consumption (4.8 Lpf/1.28 gpf), utilizes 20%
less water
• Meets EPA WaterSense
®
criteria
• PowerWash
®
rim scrubs bowl with each ush
• 3" ush valve with 2" trapway for optimal
ushing performance
• 12" (305mm) rough-in
• Generous 9" x 8" water surface area
• Color matched trip lever is supplied
• Limited lifetime warranty on chinaware,
limited 2 year warranty on all mechanical parts
and limited 1 year warranty on seat which is
purchased separately
❏ 3437C.101 Elongated Bowl
❏ 4425A.104 Tank
Nominal Dimensions:
29-3/4" x 17-15/16" x 28-7/16"
(756 x 456 x 722mm)
Fixture only. Toilet seat, wax ring and supply
line are purchased separately.
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2/CSA B45.1 for Vitreous
China Fixtures
• US EPA WaterSense
®
Specication for HETs
Reliant
™
Elongated 12" Rough Toilet
VITREOUS CHINA
FINISHED WALL
1"
(25mm)
15"
(381mm)
FINISHED
FLOOR
12"
(305mm)
29-3/4"
(756mm)
C/L OF OUTLET
3-9/16"
(91mm)
3-3/16"
(81mm)
8-9/16"
(217mm)
18-9/16"
(471mm)
C/L OF SEAT POST HOLES
5-1/2" CENTERS (140mm)
13-3/8"
(340mm)
7-3/16"
(183mm)
28-7/16"
(722mm)
17-15/16"
(456mm)
SUPPLY
AS
REQ'D
9-13/16"
(249mm)
6"
(152mm)
14-1/16"
(357mm)
*
10"
(254mm)
*
To Be Specied:
❏ Color: ❏ White
❏ Seat: Recommend American Standard slow-close
seat and cover such as model 5503A.00B
❏ Supply with stop:
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of
tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
Certified by
IAPMO R&T