Installation Sheet

SAVE FOR FUTURE USE
7302213-100 Rev. A
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2015
Closet Carrier Support
Putty Knife
Sealant
Tape Measure
Regular Screwdriver
Adjustable Wrench
Carpenters Level
Flush Valve
RECOMMENDED TOOLS AND MATERIALS
RAPIDWAY
™
FLUSHVALVE 3-BOLT
WALL-MOUNTED TOILETS
INSTALLATION INSTRUCTIONS
CAUTION: PRODUCT IS FRAGILE. TWO PEOPLE ARE RECOMMENDED FOR HANDLING
TO AVOID BREAKAGE AND POSSIBLE INJURY!
NOTE: For proper operation product requires a minimum of 30 psi working line pressure
Meets the American Disabilities Act Guidelines and ANSI A117.1
Requirements for the Physically Challenged
Thank you for selecting American Standard – the benchmark of fine quality for over 100 years. To ensure this product is
installed properly, please read these instructions carefully before you begin. (Certain installations may require professional
help.) Also be sure your installation conforms to local codes.
!
1
Pictures may not exactly define contour of china
TOP SPUD
BACK SPUD
* THESE DIMENSIONS MUST BE MAINTAINED FOR PROPER INSTALLATION
**VARIABLE-CHECK WITH MANUFACTURER OF FLUSH VALVE FOR PROPER ROUGH-IN
18-1/2"
(470mm)
14"
(356mm)
5-1/2"
(140mm)
25"
(635mm)
*6-1/4"
(159mm)
*9" (229mm)
*6" (152mm)
15-1/2"
(394mm)
1-3/4"
(44mm)
3-1/4"
(83mm)
12-1/4"
(311mm)
C/L 4" (102mm) OUTLET
1-1/2" (38) SPUD
CONNECTION
2-1/8" (54) WALL
TO END OF 3
SUPPORTING
STUDS
FINISHED
FLOOR
3-1/8" (79mm)
1" (25mm)
I.P.S. SUPPLY
6" (152mm)
DIA. HOLE
2" (51mm)
DIA. HOLE
(3) PLACES
**4-3/4"
(121mm)
*
*
**4-3/4"
(121mm)
FINISHED
WALL
*1/16"
(1.5mm)
*1/16"
(1.5mm)
18-1/2"
(470mm)
14"
(356mm)
3-1/4"
(83mm)
15-1/2"
(394mm)
2-1/8" (54mm) WALL
TO END OF 3
SUPPORTING STUDS
C/L 4" (102mm) OUTLET
CONNECTION
C/L 4" (102mm) OUTLET
CONNECTION
1-3/4"
(44mm)
FINISHED
FLOOR
WALL OPENINGS
FINISHED WALL
12-1/4"
(311mm)
*6-1/4"
(159mm)
*9"
(229mm)
*6"
(152mm)
*6" (152mm)
DIA HOLE
*4-3/4"
(121mm)
3" (76mm)
DIA HOLE
2" (51mm)
DIA HOLE
(3) PLACES
25"
(635mm)
*1/16"
(1.5mm)
*1/16"
(1.5mm)