Manualshelf

Installation Guide

ManualsBrandsAmerican Standard ManualsBathroomMadera White Elongated Chair Height Toilet Bowl
12
SAVE FOR FUTURE USE
1
7301166-100 Rev. 4 9/19
Product names listed herein are trademarks of AS America, Inc.
© AS Americas Inc. 2019
Putty Knife
Adjustable Wrench
Sealant
Tape Measure
Regular Screwdriver
Phillips Screwdriver
Carpenters Level
Flush Valve
RECOMMENDED TOOLS AND MATERIALS
FLOOR MOUNTED BOTTOM OUTLET
FLUSH VALVE TOILETS
ALL 16-1/2" RIGHT HEIGHT
®
TOILETS MEET ADA GUIDELINES:
CAUTION: PRODUCT IS FRAGILE.
TWO PEOPLE ARE RECOMMENDED FOR HANDLING TO AVOID BREAKAGE AND POSSIBLE INJURY!
NOTE: For proper operation product requires a minimum of 30 psi working line pressure
Meets the American Disabilities Act Guidelines and ANSI A117.1
Requirements for the Physically Challenged
Thank you for selecting American Standard – the benchmark of fine quality for over 100 years. To ensure this product is installed properly,
please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your
installation conforms to local codes.
!
INSTALLATION INSTRUCTIONS
NORMAL HEIGHT 15"
RIGHT HEIGHT
®
16-1/2"
YOUTH HEIGHT 14"
BOWL TYPE
TOP SPUD BACK SPUD
A B C D
381mm
(15")
673mm
(26-1/2")
381mm
(15")
400mm
(15-3/4")
419mm
(16-1/2")
711mm
(28")
356mm
(14")
673mm
(26-1/2")
419mm
(16-1/2")
438mm
(17-1/4")
B
1 - 1/2
SPUD
121mm
(4-3/4")
238mm
(9-3/8")
A
470mm
(18-1/2")
338mm
(13-5/16")
150mm
(5-7/8")
254mm
(10")
13mm
(1/2")
25mm
(1")
102mm
(4")
718mm
(28-1/4")
C/L OF SEAT POST
HOLES 140mm
(5-1/2) CENTERS
FINISHED WALL
FINISHED
FLOOR
C/L OF OUTLET
1" N.P.T. OR 1" C.W.T.
SUPPLY TO FLUSH VALVE
356mm
(14")
TOP SPUD
FINISHED
FLOOR
238mm
(9-3/8")
C
D
470mm
(18-1/2")
356mm
(14")
338mm
(13-5/16")
150mm
(5-7/8")
254mm
(10")
13mm
(1/2")
76mm
(3")
718mm
(28-1/4")
C/L OF SEAT POST
HOLES 140mm
(5-1/2) CENTERS
FINISHED WALL
C/L OF OUTLET
BACK SPUD
BACK-TO-BACK INSTALLATION
Recommended fitting type for
back-to-back installations.
Depending upon your plumbing and venting conditions, the flow from this
toilet in a back-to-back installation may create a vacuum on the system
and draw water from the opposing bowl. The National Standards Plumbing
Code prohibits the use of a cross fitting for drainage as throw over is
possible. The code does approve a directional "Y" style fitting with proper
venting to direct the water downward and away from the other toilet.
Pictures may not
exactly define
contour of china.

Summary of content (2 pages)