Technical Specifications

M96
© 2014 AS America Inc.
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES - CHECK LOCAL CODES.
When installed so top of seat is 432 to 483mm (17" to 19") from the
finished floor.
RIGHT WIDTH
™
FloWise
®
ELONGATED
RIGHT HEIGHT
®
FLUSHOMETER TOILET
VITREOUS CHINA
RIGHT WIDTH™ FloWise
®
ELONGATED
RIGHT HEIGHT
®
FLUSHOMETER TOILET
• Floormountelongatedushometertoiletwithseat
• Vitreouschina
• Loadtestedto2,000lbs.-Perfectfor
 BariatricApplicatons
•HighEfficiency,LowConsumption.Operatesinthe
rangeof1.28gpfto1.6gpf(4.9Lpfto6.0Lpf)
•MeetsdenitionofHET(HighEfficiencyToilet)when
usedwitha1.28gpfhighefficiencyushvalve
• Widerfootprintisidealforretrotinstallation
• 17"rimheightforaccessibleapplications
• Elongated,OpenFront,RightWidth™seat
 (lesstoiletseatlid)included
• Fullyglazed2"trapway
• 10"or12"Rough-in
• 1-1/2"inletspud
• 2boltcaps
❏ 3641.001Topspud
System MaP* Score:
• 1,000gramsofmiso@1.6gpfor1.28gpfwhen
usedwithanAmericanStandardushvalve
* MaximumPerformance(MaP)testingperformedbyIAPMO
R&TLab.MaPReportconductedbyVeritecConsulting,Inc.
andKoellerandCompany.
Nominal Dimensions:
718x432x434mm
(28-1/4"x17"x17-1/8")
Recommendedworkingpressure–between
30psiatvalvewhenushingand80psistatic
FixtureandSeatonly,ushvalvebyothers
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.2-2008/CSAB45.1-08forVitreous
ChinaFixtures
NOTES:
THISTOILETISDESIGNEDTOROUGH-INATAMINIMUMDIMENSION
OF254MM(10")FROMFINISHEDWALLTOC/LOFOUTLET.
TOCOMPLYWITHAREACODEGOVERNINGTHEHEIGHTOFVACUUM
BREAKERONFLUSHVALVE,THEPLUMBERMUSTVERIFY 
DIMENSIONSSHOWNFORSUPPLYROUGHING.
FLUSHVALVENOTINCLUDEDANDMUSTBEORDEREDSEPARATELY.
IMPORTANT:Dimensionsofxturesarenominalandmayvarywithin
therangeoftolerancesestablishedbyANSIStandardA112.19.2.These
measurementsaresubjecttochangeorcancellation.Noresponsibilityis
assumedforuseofsupersededorvoidedpages.
BARRIER FREE
To Be Specied:
❏Color:❏White
❏ FlushometerValve:
 ❏1.6gpf:
❏ Sensor-Operated:AmericanStandard
Selectronic
®
DCPower#6065.161.002
(TopSpud)
❏ Manual:AmericanStandard#6047.161.002
(TopSpud)
 ❏1.28gpf:
❏ Sensor-Operated:AmericanStandard
Selectronic
®
DCPower#6065.121.002
(TopSpud)
❏ Manual:AmericanStandard#6047.121.002
(TopSpud)
Revised4/13
724mm
(28-1/2")
REF.
1-1/2"
(38mm)
SPUD
121mm
(4-3/4")
REF.
304mm
(12")
254mm
(10")
434mm
(17-1/8")
470mm
(18-1/2")
89mm
(3-1/2")
16mm
(5/8")
718mm
(28-1/4")
432mm
(17")
338mm
(16-3/8")
181mm
(7-1/8")
13mm
(1/2")
C/L OF SEAT POST
HOLES 140mm (5-1/2")
CENTERS
FINISHED WALL
FINISHED
FLOOR
C/L OF OUTLET
1" N.P.T. OR 1" C.W.T. SUPPLY
TO FLUSH VALV E