Specification Sheet

K121
© 2010 AS America Inc.
CADET
®
3 FloWise
®
ROUND FRONT 10" ROUGH-IN TOILET
❑ 2830.128
• Vitreous china
• Meets denition for HET (High Efciency Toilet)
• High efciency (4.8 Lpf/1.28 gpf)
• Meets EPA WaterSense
®
criteria
• EverClean
®
surface inhibits the growth of
stain- and odor-causing bacteria, mold,
and mildew on the surface
• Features the Cadet
®
3 Flushing System
• Space saving round front siphon action
jetted bowl
• Fully-glazed 2-1/8" trapway
• Generous 9" x 8" water surface area
• Close-coupled tank with at tank cover for
superior storage
• Oversized 3" ush valve with chemical
resistant apper
• Chrome trip lever
• Speed Connect
®
tank-to-bowl
coupling system
• Sanitary dam on bowl with four point
tank stabilization
• 2 color-matched bolt caps
• 100% factory ush tested
• 5 year warranty
❑ 3011.128 Right Height™ Round Front Bowl
❑ 3011.001 Right Height™ Round Front
Universal Bowl
❑ 4019.128 Tank
Nominal Dimensions:
667 x 432 x 740mm (26-1/4" x 17" x 29-1/8")
Fixture only, seat and supply by others
Alternative Tank Congurations Available:
❑ 4019.813 Tank complete with trip lever
on right side
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2-2008/CSA B45.1-08 for Vitreous
China Fixtures
• US EPA WaterSense
®
Specication for HET's
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Black
❏ Seat: #5330.010 Round front Champion
®
Slow Close
solid plastic seat and cover with easy lift off feature
❏ Seat: #5282.011 Round Front EverClean
®
solid
plastic seat and cover
❏ Seat: #5320.110 EverClean
®
Round Front Seat with
Slow Close Snap-Off Hinges
❏ Supply with stop:
CADET
®
3 FloWise
®
ROUND FRONT 10" ROUGH-IN TOILET
VITREOUS CHINA
Revised 2/10
Certified by
IAPMO R&T
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
254MM (10") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
FINISHED WALL
FINISHED
FLOOR
C/L OF OUTLET
SUPPLY
AS
REQ'D.
184mm
(7-1/4")
667mm
(26-1/4")
19mm ± 6mm
(3/4" ± 1/4")
64mm
(2-1/2")
416mm
(16-3/8")
432mm
(17")
740mm
(29-1/8")
381mm
(15")
*203mm
(8")
254mm
(10")
337mm
(13-1/4")
216mm
(8-1/2 " )
C/L OF SEAT POST HOLES
140mm (5-1/2" CENTERS)
356mm
(14")
*152mm
(6")
244mm
(9-5/8")