Use and Care Guide

M41
© 2010 AS America Inc.
Revised 2/10
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Black
❏ Seat: American Standard #5324.019 “Rise and
Shine” (with easy to clean lift-off hinge system)
solid plastic closed front seat with cover.
❏ American Standard #5321.110 EverClean
®
seat with Slow Close snap-off hinges.
❏ Alternate Seat:
❏ Supply with Stop:
YORKVILLE FloWise
™
RIGHT HEIGHT
™
EL
PRESSURE-ASSISTED TOILET 1.1 gpf / 4.2 Lpf
VITREOUS CHINA
YORKVILLE FloWise™ RIGHT HEIGHT™
ELONGATED PRESSURE-ASSISTED TOILET
1.1 gpf/ 4.2 Lpf
❏ 2878.100
• Vitreous china
• Floor-mounted, back-outlet toilet
• High Efciency, Ultra Low-consumption
(1.1 gpf/4.2 Lpf)
• EverClean
®
surface inhibits the growth of
stain and odor-causing bacteria, mold,
and mildew on the surface
• Meets EPA WaterSense
®
criteria
• Elongated 16-1/2" high bowl rim for
accessible applications
• Pressure-assisted siphon jet ush action
• Fully-glazed 2-1/8" trapway
• 10 x 12" water surface area
• Close-coupled Flushometer tank*
• Metal chrome trip lever
• Speed Connect
®
tank/bowl coupling system
• Sanitary dam on bowl
• 4 bolt caps
• 100% factory ush tested
❏ 3703.100 Elongated 16-1/2" high bowl with 4
bolt caps
❏ 3703.001 Same as above, Universal Bowl
❏ 4142.100 Flushometer tank complete with
coupling components
Nominal Dimensions:
752 x 516 x 780mm (29-3/4" x 20-1/2" x 30-3/4")
Fixture only, seat and supply by others
Recommended working pressure range
25 psi - 80 psi
Alternate Congurations Available:
❏ 4142.601 Tank and tank cover only with tank
cover locking device
❏ 4142.801 Tank and tank cover only with right
hand trip lever
❏ 4142.901 Tank complete with right hand trip
lever and tank cover locking device
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2-2008/CSA B45.1-08 for Vitreous
China Fixtures
• US EPA WaterSense
®
Specication for HET's
NOTES:
WASTE OUTLET SEAL RING MUST BE NEOPRENE OR GRAPHITE-
FELT (WAX RING NOT RECOMMENDED).
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
DISTANCE FROM FLOOR TO CLOSET FLANGE CENTERLINE (ROUGH-
IN) MUST BE 4” (102 MM) WITH FLANGE SURFACE FLUSH TO 1/16”
(1.5MM) MAX. BEYOND FINISHED WALL.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
FOR ADDITIONAL INFORMATION REFER TO INSTALLATION
INSTRUCTIONS SUPPLIED.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ASME A112.19.2-2008 / CSH B45.1-08.
These measurements are subject to change or cancellation. No
responsibility is assumed for use of superseded or voided pages.
780mm
(30-3/4")
230mm
(9")
419mm
(16-1/2")
470mm
(18-1/2")
752mm
(29-3/4")
C/L OF SEAT POST HOLES
140mm (5-1/2") CENTER
FINISHED WALL
FINISHED
FLOOR
*152 mm
(6")
76mm (3")
346mm
(13-5/8")
305mm
(12")
C/L OF 1/2" DIA HOLES
168mm (6-5/8") CENTERS
76mm
(3")
76mm
(3")
*229mm
(9")
102 mm
(4")
C/L OF
WASTE
OUTLET
13 x 19mm
(1/2 x 3/4")
SLOTS
FLEX
SUPPLY
AS REQ.
C/L
19mm ±6mm
(3/4"" ± 1/4)
226mm
(9
"
)
516mm
(20-1/2
"
)
356mm
(14")
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES - CHECK LOCAL CODES.
When installed so top of seat is 432 to 483mm (17" to 19") from the
finished floor.
BARRIER FREE
Certified by
IAPMO R&T