Installation Guide

ManualsBrandsAmerican Standard ManualsBathCadet Pro 1.28 GPF Single Flush Toilet Tank Only with 12 in. Rough in White

SAVE FOR FUTURE USE

7301878-100

Product names listed herein are trademarks of AS America, Inc.

Cadet

PRO 2-piece Toilet

Elongated and Round Front

Models 215AA, 215BA, 215AB, 215BB, 215FA, 215FC, 215CA, 215DA, 215CB, 215DB Series

INSTALLATION INSTRUCTIONS

CARE AND MAINTENANCE

CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!

NOTE: Pictures may not exactly define contour of china and components.

Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product is installed properly, please read

these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes.

Wax Ring

Tank To Bowl Gasket

Slow Close Toilet Seat

Water Supply Line

Attachment Handles

with Nuts (2)

Plastic Washers (2)

Bolt Caps (2) Bowl-To-Floor Knobs (2)

T-Bolts with Retainer (2)

EZ-INSTALL KIT INCLUDED WITH TANK

TANK 4188A and 4188B

BOWL 3517A, 3517C, 3517F ELONGATED

BOWL 3517B, 3517D ROUND FRONT

SOLD SEPARATELY

EZ-INSTALL KIT INCLUDED WITH BOWL

Summary of content (4 pages)

PAGE 1
INSTALLATION INSTRUCTIONS CARE AND MAINTENANCE Cadet® PRO 2-piece Toilet Elongated and Round Front Models 215AA, 215BA, 215AB, 215BB, 215FA, 215FC, 215CA, 215DA, 215CB, 215DB Series Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product is installed properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes.
PAGE 2
ROUGHING-IN DIMENSIONS: NOTE: Distance from wall to closet flange centerline must be as listed on chart under ROUGH-IN DIMENSION “A”, the BOWL HEIGHT is listed as DIMENSION “B”. BOWL SHAPE FINISHED WALL SUPPLY AS REQ'D. B B FINISHED FLOOR ROUGH-IN BOWL COMBINATION BOWL TANK DIM. “A” HEIGHT MODEL MODEL MODEL DIM.
PAGE 3
4 Apply weight evenly. Do not move after placement. Water tight seal may break. 5 ! Hand tighten only. Do not overtighten. 6 Tighten handles alternately until the tank contacts the front and back of the bowl achieving china-to-china contact. NOTE: To ease installation, push down on the top of the tank while tightening handles. 7 ! A Connect water supply line. (Sold separately) Hand tighten nut. B WARNING: Overtightening of water supply line nuts could result in breakage and potential flooding.
PAGE 4
8 Water Level Adjustment Knob Refill Tube Trip Lever Rod A Approximate Water Level Adjust water level to level indicated on tank by turning water level adjustment knob to move float cup up or down. Float Cup Flush Valve Chain Fill Valve Or Water Control B Flush Valve Overflow Tube Flapper Seal Flapper Tank to Bowl Gasket REPAIR PARTS LABEL LOCATED UNDER TANK LID.