Specification Sheet

ManualsBrandsAmerican Standard ManualsBathroom FixturesAmerican Standard 4225A004.020 Champion Pro 1.6Gpf Tank Only, White

K92

CHAMPION

PRO ELONGATED TOILET

❑ 211CA.004

• Features Champion® Flushing System

• Vitreous china

• Low consumption (1.6 gpf/6.0 Lpf) toilet

• Trade exclusive tank

• PowerWash

rim scrubs bowl with each ush

• Robust metal trip lever & metal shank ll valve

• Includes EZ-Install tools w/color match bowl caps

• EverClean

Surface included

• 4" piston-action Accelerator™ ush valve

• Fully-glazed 2-3/8" trapway

• 12" (305mm) rough-in

• Generous 9" x 8" water surface area

• Chrome nish trip lever is supplied

• 1,000g MaP Score** at 1.6gpf

• 10 year warranty

❑ 211CA.005 Same as above except trip lever on

right hand side

❑ 3195C.101 Elongated Bowl

❑ 4225A.004 Tank

Nominal Dimensions:

768 x 483 x 785mm (30-1/4" x 19" x 30-7/8")

Fixture only, seat and supply sold separately

Alternative Tank Congurations Available:

❑ 4225A.064 Tank complete with tank cover

locking device

❑ 4225A.005 Tank complete with trip lever

located on right side

Compliance Certications -

Meets or Exceeds the Following Specications:

• ASME A112.19.2-2008/CSA B45.1-08 for Vitreous

China Fixtures

CHAMPION

PRO

ELONGATED TOILET

VITREOUS CHINA

1/14

To Be Specied:

❏ Color: ❏ White ❏ Bone ❏ Linen

❏ Seat: #5325.010 Elongated Champion

Slow Close

solid plastic seat and cover

❏ Supply with stop:

** Maximum Performance (MaP) testing performed by

IAPMO R&T Lab. MaP Report conducted by Veritec

Consulting, Inc. and Koeller and Company.

19"

(483mm)

30-1/4"

(768mm)

(230mm)

1" (26mm)

3-9/16" (90mm)

10-1/2"

(267mm)

29-3/8"

(746mm)

15"

(381mm)

FINISHED WALL

FINISHED

FLOOR

SUPPLY

REQ'D

14"

(356mm)

C/L OF OUTLET

(152mm)

*10"

(254mm)

470mm

(18-1/2")

C/L OF SEAT POST HOLES

140mm (5-1/2" CENTERS)

12"

(305mm)

13-13/16"

(351mm)

9-3/8"

(238mm)

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF

305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED

SEPARATELY.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of xtures are nominal and may vary within the

range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility

is assumed for use of superseded or voided pages.