Specifications
A75
© 2014 AS America Inc.
MODEL NUMBER:
4433.410 Bar Faucet with Pull-Down Spray
4433.410.F15 Bar Faucet with Pull-Down Spray
PRODUCT FEATURES:
Ceramic Disc Valve Cartridge: Assures smooth, precise
valve control and a lifetime of drip-free, maintenance-free
performance.
Memory Position Valving: Allows user to turn valve on
and off at preferred temperature setting without readjusting
handle position each time.
Lead Free: Faucet contains ≤ 0.25% total lead content by
weighted average.
Integral Check Valves: Prevents back flow.
SUGGESTED SPECIFICATION:
Single control kitchen pull-down faucet shall feature a metal swivel spout with pull-down spray with two check valves, metal
escutcheon plate and handle. Shall also feature washerless ceramic disc valve cartridge and flexible Stainless Steel supply
hoses. Faucet shall be American Standard Model # 4433.410.____.____.
4433.410
Pull-Down Bar Faucet - 2.2 gpm/8.3 L/min. maximum flow rate
4433.410.F15
Pull-Down Bar Faucet - 1.5 gpm/5.7 L/min. maximum flow rate
GENERAL DESCRIPTION:
Metal handle and escutcheon plate. Swivel spout (150˚ rotation)
with pull-down spray. Washerless 40mm ceramic disc valve
cartridge. Braided flexible Stainless Steel supply hoses with 3/8"
compression connections. Metal mounting shank with brass
fixation ring. Complete with two integral check valves. 2.2 gpm/8.3
L/min. maximum flow rate,
1.5 gpm/5.7 L/min, maximum flow
rate for F15 models.
Fitting can be mounted with or without
escutcheon plate (escutcheon size 10-1/16"L x 2-1/2"W).
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
NSF 61/Section 9 & Annex G
CSA B125
Product
Number
Description
Finish Options
Polished
Chrome
002
Stainless
Steel
(PVD)
075
Oil
Rubbed
Bronze
224
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
10080604020
358mm
(14")
97mm
(3-13/16")
163mm
(6-7/16")
238mm
(9-3/8")
PULL DOWN
SPRAY
64mm
(2-1/2")
70mm
(2-3/4")
57mm(2-1/4")
WITH ESCUTCHEON
76mm(3")
LESS ESCUTCHEON
SUPPLIES ARE
3/8 COMPRESSION
35 to 38mm
(1-3/8" to 1- 1/2")
DIA. MOUNTING
HOLE
255mm
(10-1/16")
533mm
(21")
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
10080604020
1. 5 gpm/5.7 L/min. FLOW RATE
2.2 gpm/8.3 L/min. FLOW RATE
Revised 3/14
QUINCE
™
HIGH ARC BAR FAUCET
WITH PULL-DOWN SPRAY