Installation Guide

TOP MOUNT

KITCHEN FAUCETS

Installation

Instructions

M 9 6 8 14 5 R E V. 1. 4

Certiﬁed to comply with ANSI A112.18.1M

U.S. Patent No. 5,819,789

4771.732

4771.732F15

INSTALL FAUCET

Place faucet in position on sink.

Assemble and tighten LOCKNUTS (3) from underside of SINK.

Connect the HOT water supply to the left SHANK and the

COLD water supply to the right SHANK using sealant,

appropriate connectors, and COUPLING NUTS (4).

TO INSTALL SPRAY:

Screw SPOUT (1) onto BODY (2).

Place the HOLDER (6) into the appropriate mounting hole.

Assemble the SPRAY HOLDER WING NUT (7) onto the

shank of SPRAY HOLDER (6) from below and tighten.

From underneath sink, attach COUPLING NUT (9)

of SPRAY HOSE (8) to HOSE SHANK (10).

Tighten COUPLING NUT (9) ﬁrmly.

Feed SPRAY HOSE (8) through HOLDER (6)

so SPRAY sits in HOLDER (6).

Unscrew SPRAY CAP (5).

HOT

COLD

PUTTY

SINK

Required Tools

Adjustable Wrench

Channel Locks

Flat Blade Screwdriver

Plumbers' Putty or Caulking

Phillips Screwdriver

CAUTION

Turn off hot and cold water

supplies before beginning.

Thank you for selecting American-Standard...

the benchmark of ﬁne quality for over 100 years.

To ensure that your installation proceeds smoothly--

please read these instructions carefully before you begin.

PAGE 1
Installation Instructions ® 4771.732 4771.732F15 TOP MOUNT KITCHEN FAUCETS Thank you for selecting American-Standard... the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin. Certified to comply with ANSI A112.18.1M U.S. Patent No. 5,819,789 M 9 6 8 14 5 R E V. 1.
PAGE 2
TEST INSTALLED FAUCET Remove AERATOR. With handle in OFF position, turn on water supplies and check all connections for leaks. Operate both handles to flush water lines thoroughly. Operate SPRAY (if present). Turn handles into OFF position and replace AERATOR. 3 SERVICE To change direction of handle rotation, proceed as follows: Turn valve to OFF position. 2 90° Pull out INDEX CAP and remove HANDLE SCREW. Pull off HANDLE BASE and remove ADAPTER. Remove SPRING CLIP (1).
PAGE 3
® KITCHEN FAUCET MODEL NUMBERS 060469-YYY220A (2.2 GPM) SPOUT KITw/O-RING 4771.732 4771.732F15 060469-YYY150A (1.5 GPM) SPOUT KITw/O-RING 042692-0070A PORCELAIN CROSS HANDLE 013311-YYY0A INDEX CAP 918428-0070A HANDLE SCREW 021470-YYY0A INDEX CAP 066070-YYY0A (2.2 GPM) AERATOR M922881-YYY0A (1.