User guide

TOWN SQUARE
ACRYLIC SHOWER BASE
Installation Instructions
752769-100 Rev. C
Certified to comply with ANSI Z124.2 1987.
Observe local plumbing and building codes.
NOTE: Read instructions completely before proceeding with installation.
For alcove (.STTS models) installation only:
The opening dimensions should be 1/8" larger than dimensions shown.
D
C
870mm
(34-1/4)
215mm
(8-7/16)
610mm
(24)
1219mm
(48)
4834.STTS
DRAIN
ASSEMBLY
Strainer
Drain
Body
Shower
Base
Silicone
Sealant
Rubber
Gasket
Fiber
Gasket
Locking
Nut
Rubber
Caulking
Gasket
51 x 102 mm
(2 x 4) Stud Wall
Waterproof
Drywall
13mm (1/2")
minimum
Bedding Material Area
3 mm
(1/8)
127 mm (5)
51 mm (2)
PVC Pipe
3838.NEOTS
972mm
(38-1/4)
972mm
(38-1/4)
215mm
(8-7/16)
215mm
(8-7/16)
484mm
(19-1/16)
679mm
(26-3/4)
484mm
(19-1/16)
FRONT
Bedding
Material
No Bedding
Under
Apron
A
51 mm (2)
PVC Waste Pipe
127mm x 127mm
(5 x 5) Opening
(See Product Chart for Drain Location)
C/L
C/L
3838 NEOTS
90° 90°
3636.STTS
914mm
(36)
457mm
(18)
914mm
(36)
215mm
(8-7/16)
FRONT
Insure the floor and stud walls
are square and plumb.
Provide a 5" x 5" (127mm x
127mm) opening in the floor
for the drain (see Figs. A & B).
The drain plug accommodates
a 2" (51mm) PVC waste pipe.
The waste pipe should extend
above the surface of the
sub-floor 3/8" ± 1/16".
Note: Variations in levelness
of subfloor may require
adjustment of waste pipe
height. See product drawings
on this page for the specified
drain locations.
Before installing drain into
the shower base, remove
strainer (see Fig. C). This
will be installed after
shower base is in its final
position. Install the drain to
the shower base as shown
in Fig. D. Use silicone
sealant between drain
body and shower base.
B
3636.STTS, 4834.STTS
90°
90°
51 mm (2)
PVC Waste Pipe
127mm x 127mm
(5 x 5) Opening
C/L
(See Product Chart for Drain Location)
2
1
MODELS 3636.STTS, 3838.NEOTS, 4834.STTS
Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product is
installed properly, please read these instructions carefully before you begin. (Certain installations may require professional
help.) Also be sure your installation conforms to local codes.