Use and Care Guide

© 2003 American Standard Inc.
BS-74
REGALYN™
WALL-MOUNT LAVATORY
ENAMELED CAST IRON
REGALYN™ WALL-MOUNT SINK
• Enameled Cast Iron
• Wall-hung installation
• Front overflow
• One soap depression
• Supplied with wall hanger
• Choice of faucet holes on 4” or 8” centers
❏ 4869.008
faucet holes on 8” (203mm) centers
❏ 4869.004
faucet holes on 4" (102mm) centers (shown)
❏ 382430-106 Wall Hanger
Nominal Dimensions: 20" x 18"
508 x 457mm
Bowl sizes:
394mm (15-1/2") wide,
251mm (9-7/8") front to back,
152mm (6") deep
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.1 for Cast Iron Plumbing Fixtures
• CAN / CSA B45 Series
To Be Specified
❏ Color:
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies with stop:
❏ 1-1/4" Trap:
* See faucet section for additional models available
8
(203mm)
18
(457mm)
C/L
4-1/8
(105mm)
7-5/8
(194mm)
3-3/4
(95mm)
12-1/2
(318mm)
31 (787mm)
34 (864mm)
11-1/4
(286mm)
2-3/4
(70mm)
10
(254mm)
8
(203mm)
4
(102mm)
20
(508mm)
10-1/2
(267mm)
4
(102mm)
FINISHED WALL
FINISHED FLOOR
SUPPLIES
AS REQ'D.
HANGER
POP-UP WASTE
OUTLET 1-1/4 O.D.
DRAIN PLUG
WASTE OUTLET
1-1/4 O.D. WASTE
*
*
*
9/02
NOTES:
LAVATORY DESIGNED TO MEET ADA STANDARDS WITH MOUNTING HEIGHT SET AT
34” (864mm) ABOVE FINISHED FLOOR.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND "P" TRAP ARE SUGGESTED.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances
established by ANSI Standard A112.19.1
These measurements are subject to change or cancellation. No responsibility is assumed for
use of superseded or voided leaflet.
*