Installation Guide

730132-100

Product names listed herein are trademarks of AS America, Inc.

SNAP-OFF TOILET SEAT

SNAP-OFF INSTRUCTIONS SNAP-ON INSTRUCTIONS

Elongated Models: 5280.510, 5321.110, 5350.510, 5361.110, 5363.110

Round Front Models: 5285.510, 5320.110, 5345.510, 5364.110, 5365.110

NOTE: Pictures may not exactly depict toilet seat and components.

Thank you for selecting American Standard – the benchmark of fine quality for over 100 years. To ensure this product is installed

properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure

your installation conforms to local codes.

INSTALLATION INSTRUCTIONS

5 6

FRONT OF BOWL

TANK

Position the seat and align the hinge

over the holes of the toilet bowl.

Thread the plastic wing nuts on to the bolts. Tighten the bolts using a screwdriver.

The hinge features built-in adjust-

able washers. Rotate washers as

needed for the best alignment of the

seat on the toilet bowl.

Slip the bolts through the hinge holes.

Close the hinge covers.

Close the hinge covers.Pull up on the toilet seat. The

two flexible gaskets remain.

Align the hinge holes and press

down towards the flexible gaskets.

Open the hinge covers.

PAGE 1
INSTALLATION INSTRUCTIONS SNAP-OFF TOILET SEAT Elongated Models: 5280.510, 5321.110, 5350.510, 5361.110, 5363.110 Round Front Models: 5285.510, 5320.110, 5345.510, 5364.110, 5365.110 Thank you for selecting American Standard – the benchmark of fine quality for over 100 years. To ensure this product is installed properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes.
PAGE 2
Care and Cleaning When cleaning your toilet seat wash it with a mild, soapy water: rinse the seat thoroughly with clear water and dry with a soft cloth. Avoid detergents, disinfectants, or cleaning products in aerosol cans. Never use abrasive scouring powders on your seat. Some bathroom chemicals and cosmetics may damage the seat’s finish. After installation, check the tightness of the bolts from time to time to ensure a tight fit. AS AMERICA, INC.