Installation Guide

LAUREL™ TOILET SEAT

MODELS 5308.014, 5311.012

Installation

Instructions

760027-100 Rev. B

Thank you for selecting American-Standard...the benchmark

of fine quality for over 100 years.

To ensure that your installation proceeds smoothly--please

read these instructions carefully before you begin.

TOILET SEAT

™

©AMERICAN STANDARD INC. 2002

Remove the paper from

both sides of the washer.

Attach washer to bottom of

hinge.

Place seat on bowl. Be

careful to center hinge over

holes in bowl.

Insert bolts in hinges. Attach the nut from below. Use a screwdriver to tighten

bolt.

Close the hinge covers.

CARE AND CLEANING...

When cleaning your toilet seat wash it with mild, soapy water: rinse the

seat thoroughly with clear water: and dry with a soft cloth.

Avoid detergents, disinfectants, or cleaning products in aerosol cans.

NEVER use abrasive scouring powders on your seat. Some bathroom

chemicals and cosmetics may damage the seat's finish. After installation,

check the tightness of the bolts from time to time to ensure a tight fit.

U.S. PAT. D-355,713

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.

All product names listed herein are trademarks of American Standard Inc. unless otherwise noted.

PAGE 1
Installation Instructions ™ TOILET SEAT LAUREL™ TOILET SEAT MODELS 5308.014, 5311.012 Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin. U.S. PAT. D-355,713 760027-100 Rev. B 1 2 Remove the paper from both sides of the washer. 4 Insert bolts in hinges. 7 3 Attach washer to bottom of hinge. 5 Place seat on bowl.
PAGE 2
AMERICAN STANDARD ONE-YEAR LIMITED WARRANTY If inspection of this American Standard plumbing product, within one year after its initial installation, confirms that it is defective in materials or workmanship, American Standard will repair or, at its option, exchange the product for a similar model.