Installation Guide

ManualsBrandsAmerican Standard ManualsBathCadet 3 Slow Close Round Closed Front Toilet Seat in Black

CADET

3 SLOW CLOSE TOILET SEAT

WITH EVERCLEAN

SURFACE

760133-100

All product names listed herein are trademarks of AS America, Inc. unless otherwise noted.

Hinge

Adjustment

Washer

Plastic

Wing Nut

Hinge

Gasket

Hinge

Cover

Plastic

Bolt

FRONT OF BOWL

TANK

6 7

Side View of the toilet seat installation parts.

Attach the hinge gaskets to the bottom of

the hinge. Position the seat, and then align

the hinge over the holes of the toilet bowl.

The installation kit includes two sets

of adjustment washers: One set with

center holes, and one set with off-set

holes. Use the set that provides the

best alignment of the seat on the

toilet bowl.

Slip the plastic bolts through the adjustments washer holes.

Thread the plastic wing nuts on to the plastic bolts.

Tighten the plastic bolts using a screwdriver.

Push down the hinge covers.

Replacement Kit #255 Available:

PART NO. DESCRIPTION

Replacement Kit #255

760087-0070A

To Move Seat

Forward

To Move Seat

Back

NOTE: Pictures may not exactly depict toilet seat and components.

Thank you for selecting American Standard – the benchmark of fine quality for over 100 years. To ensure this product is installed

properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure

your installation conforms to local codes.

INSTALLATION INSTRUCTIONS

MODELS 5345.110 Round Front

5350.110 Elongated

Summary of content (2 pages)

PAGE 1
INSTALLATION INSTRUCTIONS CADET® 3 SLOW CLOSE TOILET SEAT WITH EVERCLEAN® SURFACE MODELS 5345.110 Round Front 5350.110 Elongated Thank you for selecting American Standard – the benchmark of fine quality for over 100 years. To ensure this product is installed properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes. NOTE: Pictures may not exactly depict toilet seat and components.
PAGE 2
Care and Cleaning When cleaning your toilet seat wash it with a mild, soapy water: rinse the seat thoroughly with clear water and dry with a soft cloth. Avoid detergents, disinfectants, or cleaning products in aerosol cans. Never use abrasive scouring powders on your seat. Some bathroom chemicals and cosmetics may damage the seat’s finish. After installation, check the tightness of the bolts from time to time to ensure a tight fit. AS AMERICA, INC.