Installation Guide

2
M965652 Rev. 1.9 (3/19)
Thank you for selecting American-Standard...the benchmark of ne quality for over 100 years. To ensure
that your installation proceeds smoothly--please read these instructions carefully before you begin.
The illustration below shows the tting and all loose items after they have been removed
from the carton. Some items may be packaged partially assembled to other items.
UNPACKING
All American Standard Products Are Water Tested At Our Factory.
Some Residual Water May Remain In The Valve During Shipping
1. Installation Instructions
2. Spout Assembly
3. Mounting Nuts
4. Control Box
5. Supply Hose
6. Mixing Valve (optional, must be ordered separately)
7. Control Box Cover Screws
605XTMV
6059.202
6059.205
PRODUCT No.s
2
4
3
6
5
Mixing ValveBase Product
DO NOT REMOVE
PROTECTIVE
FILM FROM
SENSOR EYE UNTIL
INSTALLATION IS
COMPLETE.
1
Installation Instructions
SELECTRONIC
®
Hard-Wired AC Powered Innsbrook
Lavatory Proximity Faucet
MODEL NUMBERS
605X.202
605X.204
605X.205
•
ASMEA112.18.1
NOTE TO INSTALLER: Please give this manual to the customer after installation.
Tolearn more about American Standard Selectronic
®
Productsvisit our website at: www.americanstandard-us.com
or e-mail us at:[e-mail]
ForParts, Ser vice,Warranty or other Assistance,
please call (844) CRT-TEAM/ [phone] (In Canada:1-800-387-0369)
(InToronto Area only:1-905-306-1093)
Product No.’s & Options 1
2
Faucet Installation 2-3
Electrical Installation 4-6
Start-up / Maintenance 7-8
FAQ’s / Troubleshooting 9-10
Parts 11
CAUTION: Use only American Standard
supplied cable sets. Using non-AS supplied
cables, or cutting, splicing or modifying any
components will void the warranty.
7
Plug-In AC
Power Kit
Hard-Wired AC
Power Kit
Multi-AC
Power Kit
PK00.PAC
PK00.HAC PK00.MAC
POWER KITS SOLD SEPARATELY