Installation Guide

10
M965652 Rev. 1.7 (10/16)
Fig.6
F
GENERAL CLEANING; Fig. 5
1. Forgeneralcleaninguseadamp,softclothtoclean
the spout and the sensor.
2.Forcleaningdirtuseasoftclothwithdiluteddish
washing detergent. Wipe the area using a wet cloth
anddryusingasoftcloth.
Avoid using anything that may scratch the spout surface.
Never use polishing power, detergent or a nylon scrub brush.
TheywilldamagethesurfaceofthespoutorSensor.
CAUTION
Do not scratch the sensor when cleaning. Avoid using
any abrasives or harsh detergents or chemicals.
FAQ’S
Q:HowwillIknowifthebatteryneedstobereplaced?
A:Valvewillnotopenandsensorwillcontinuouslyblink2timesinterruptedbyapause,forupto7days.
Q:Whyhastheowrateofthefaucetreducedsignicantly?
A: Thelterassembly,owregulatororareator/spraymaybeclogged.Checkandclean.Referto
Start-up/Maintenance,sectionsC,DandE.
Q:Whydoesn’twaterowoutoffaucetwhenI’mwithinthesensordetectionzone?
A:Batterymayneedreplacement.Ifsensorcontinuouslyblinks2timesinterruptedbypause,replacebattery
orcall(844)CRT-TEAM/(844)278-8326.Z
Q:Whatisthenormaloperatingpressurerange?
A:Faucetwilloperatewithsupplypressuresrangingfrom20-80psi.