Installation Guide

1
605P400
605P800
605XTMV
605X.16X
605X.10X
3
2
4
6
7
8
5
9
1
Deck Plate
Mixing Valve
Base Product
M965650 Rev. 2.0 (3/19)
2a
All American Standard Faucets Are Water Tested At Our Factory.
Some Residual Water May Remain In The Faucet During Shipping.
Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure
that your installation proceeds smoothly--please read these instructions carefully before you begin.
UNPACKING
The illustration below shows the fitting and all loose items after they have been removed from the carton.
Some items may be packaged partially assembled to other items.
1. Installation Instructions
2. Cast Spout Assembly
2a. Gooseneck Spout Assembly
3. Mounting Kit
4. Control Box
5. Supply Hose
6. 4" Deck plate (optional, must be ordered separately)
7. 8" Deck plate (optional, must be ordered separately)
8. Mixing Valve (optional, must be ordered separately)
9. Control Box Cover Screws
Cast Spout and
Goose Neck Spout
CAUTION: Use only American Standard
supplied cable sets. Using non-AS supplied
cables, or cutting, splicing or modifying any
components will void the warranty.
Installation Instructions
Ins tallation Ins truc tions
Certified to comply with ASME A112.18.1
© 2016 American Standard
NOTE TO INSTALLER: Please give this manual to the customer after installation.NOTE TO INSTALLER: Please give this manual to the customer after installation.
To learn more about American Standard Selectronic
®
Products visit our website at: www.americanstandard-us.com
or e-mail us at: [e-mail]
For Parts, Service, Warranty or other Assistance,
please call (844) CRT-TEAM / [phone] (In Canada: 1-800-387-0369)
(In Toronto Area only: 1-905-306-1093)
SELECTRONIC
®
Proximity Faucets
605X.102
605X.163
605X.104
605X.164
605X.105
605X.165
MODEL NUMBERS
1
2
2-3
4-6
7-8
9-10
11
Product No.'s & Options
Specifications
Faucet Installation
Electrical Installation
Start-up / Maintenance
FAQ’s / Troubleshooting
Parts
1
2
2-3
4-6
7-8
9-10
11
DO NOT REMOVE
PROTECTIVE
FILM FROM
SENSOR EYE UNTIL
INSTALLATION IS
COMPLETE.
DO NOT REMOVE
PROTECTIVE
FILM FROM
SENSOR EYE UNTIL
INSTALLATION IS
COMPLETE.
Plug-In AC
Power Kit
Hard-Wired AC
Power Kit
Multi-AC
Power Kit
PK00.PAC
PK00.HAC PK00.MAC
POWER KITS SOLD SEPARATELY