Installation Guide

8
1. Remove AERATOR HOUSING (1) with KEY supplied
with faucet.
3. Remove AERATOR (2) from HOUSING (1).
2. Clean the AERATOR SCREENS (3).
4. Clean with water. Reassemble and install into
spout end. Make sure black seal washer is in place.
CLEAN AND REMOVE
THE AERATOR; Fig. 5
E
2
3
Fig.5
1
Fig.5
M965650 Rev. 2.0 (3/19)
INSTALL / REPLACE THE BATTERY or
PWRX; Fig. 4
D
Fig. 4
1. Remove COVER from CONTROL BOX (1).
2. Disconnect BATTERY HOLDER (3) from CABLE (5).
3. Remove old BATTERY from BATTERY HOLDER (3).
Install new BATTERY (2) making sure the terminal side
is inserted first and shape of the battery follows the shape
of the BATTERY HOLDER (3).
4. To replace PWRX BATTERY PACK (4), unplug and
replace with new Power Pack.
5. Reconnect BATTERY HOLDER (3) to CABLE (5).
6. Replace CONTROL BOX COVER. Tighten cover screws
firmly.
CR-P2
6
3
4
2
1
5
STANDARD
BATTERY
PWRX