Installation Guide

9
M965652 Rev. 1.9 (3/19)
Fig. 4
CR-P2
6
3
2
STANDARD
BATTERY
PWRX
4
1
5
2
3
Fig.5
1
Fig.5
D
INSTALL / REPLACE THE BATTERY
or PWRX; Fig. 4
1. Remove COVER from CONTROL BOX (1).
2. Disconnect BATTERY HOLDER (3) from CABLE (5).
3. Remove old BATTERY from Battery Holder (3). Install new
BATTERY (2) making sure the terminal side is inserted rst
and shape of the battery follows the shape of the BATTERY
HOLDER (3).
4. To replace PWRX BATTERY PACK (4), unplug and replace
with new Power Pack.
5. Reconnect BATTERY HOLDER (3) to CABLE (5).
6. Reinstall CONTROL BOXT COVER. Tighten cover
screws rmly.
E
CLEAN AND REMOVE THE AERATOR; Fig. 5
1. Remove AERATOR HOUSING (1) with KEY supplied
with faucet.
2. Remove AERATOR (2) from HOUSING (1).
3. Clean the AERATOR SCREENS (3).
4. Clean with water. Reassemble and install into spout end.
Make sure black seal washer is in place..