Instructions / Assembly

3
M965652 Rev. 1.7 (10/16)
Fig. 1a
1
5
2
4
3
3
SENSOR
CABLES
6
6
5
5
Fig. 1b
Fig. 2
1
2
3
4
5
6
7
10'
Roughing-in Dimensions
Fig. 1
RECOMMENDED TOOLS
1. Slip Joint Pliers
2. Adjustable Wrench
3. Plumbers’ Putty or Caulking
4. Phillips Screwdriver
5. Flat Blade Screwdriver
6. ElectricDrill&1/4"DrillBit
7. Tape Measure
1. Installation Instructions
2. Spout Assembly
3. Mounting Nuts
4. Control Box
5. Supply Hose
6. Mixing Valve (optional, must be ordered separately)
7. Control Box Cover Screws
GENERAL DESCRIPTION
Electronicfaucetwithproximityoperation.Vandal
resistant solid brass construction single post mounting.
OperatesonDC(battery/powerpack)orACpermanent
power(plug-in/hardwire).In-linestrainerforsolenoid
isintegral.Singleinlet3/8compression,built-incheck
valves,andexiblestainlesssteel16-1/4"reachinlet
hoseforspoutconnection.
Note: All plumbing and electrical wiring must be
installed in accordance with applicable codes,
regulations and standards.
CAUTION: Use only American Standard supplied
transformersandcablesets.Usingnon-ASsupplied
cables,orcutting,splicingormodifyingany
components will void the warranty.
1
INSTALL SPOUT ASSEMBLY;Fig. 1
1. MakesurePUTTYPLATE(1) is installed on
FAUCETBODY(2). Fig. 1a.
2.Connectthetwo27"EXTENSIONCABLES(3)
to the Faucet Sensor Cables.
3.Insert27"EXTENSIONCABLES(3),FLEX
HOSE (4)andSTUDS(5) throughholesof
mountingsurface.Fig. 1a.
4.Fromundersideofmountingsurface,installSPIN
NUTS (6) ontoMOUNTINGSTUDS(5). Fig. 1b.
5.AlignFAUCET(2) and hand tighten SPIN NUTS (6)
tosecurefaucettomountingsurface.Fig. 1b.
CAUTION
Turn off hot and cold water
supplies before beginning.
FAUCET INSTALLATION
381mm
(15)
155mm
(6-1/8)
102mm
(4)
38mm
(1-1/2)
MAX.
124mm
(4-7/8)
114mm
(4-1/2)
500mm
(20")
3/8" COMP.
125mm
(4-7/8)
81mm
(3-3/16)
MOUNTING
SURFACE
FINISHED
WALL
175mm
(6-7/8)
162mm
(6-3/8)
35mm
(1-3/8)
DIA.
3 HOLES
108mm
(4-1/4)
57mm
(2-1/4)
RECOMENDED ELECTRICAL BOX OR
EQUIVALENT BY OTHERS
HARD-WIRED AND MULTI AC 10’ MAX. CABLE LENGTH
4" (102mm) SQ. X 3-1/2" (89mm) DEEP ELECTRICAL BOX
Hubbel-RACO #256 OR EQUAL (BY OTHERS).