Instructions / Assembly
5
M965652 Rev. 1.7 (10/16)
A
DC VERSIONS ; Fig. 1
• PWRX
• STANDARD BATTERY
1. RemoveCONTROLBOXCOVER (1). Fig. 1.
2. Feed the 27"EXTENSIONCABLES (2) through the topof
CONTROLBOX (3). Fig. 1a.
FOR STANDARD BATTERY VERSION ONLY
3.InsertBATTERY(4) intoBATTERYHOLDER (5),
makesuretheshapeoftheBATTERY(4) followsthe
shapeoftheBATTERYHOLDER(5) and terminal end
is inserted rst. Fig. 1b.
4.InserttheBATTERYCONNECTOR(5a)fromthe
StandardBatteryorPWRXBatteryPackthroughside
GROMMET(6) as shown. Fig. 1c.
5. ConnectSOLENOIDCABLE(7)andBATTERY
CONNECTOR(5a) to 27"EXTENSIONCABLES (2).
PlaceStandardBatteryorPWRXBatteryPackintoh
ousing. Fig. 1d.
6. Reinstall CONTROLBOXCOVER(1). Tighten cover
screws rmly.
Fig. 1a
Fig. 1b
Fig. 1
2
3
1
4
5
INSTALL BATTERY
CR-P2
5a
5
Fig. 1c
7
2
STANDARD
BATTERY
PWRX
5a
5a
6
STANDARD
BATTERY
PWRX
Fig. 1d
5a
CAUTION: Use only American Standard supplied cable sets.
Usingnon-ASsuppliedcables,orcutting,splicingormodifying
any components will void the warranty.
ELECTRICAL INSTALLATION
Product Page
Plug-In AC Power Kit (PK00.PAC)
6
Hard-Wired AC Power Kit (PK00.HAC)
6
Multi-AC Power Kit (PK00.MAC)
7