Selectronic 605XRCT Remote Control - Rev 2016 1.
START HERE IF UPDATE IS SAVED FROM EMAIL 4. 1. Create a new folder on your computer. 2. Double-click the "Selectronic 605XRCT Software Upgrade - Rev 2016 1.2" zip folder and extract all of the files into the folder you created. 5. 3. From this new folder, double-click the “setup_celec_bootloader” to open this file and install it on your computer. 4. Select Language -> Select "OK" 6. 5. Welcome to Celec bootloader Setup Wizard -> Select "Next >" 6. Select Destination Location -> Select "Next >" 7. 7.
8. Select Additional Tasks -> Select "Next >" 9. Ready to Install -> Select "Install >" 8. 10. Install or Repair Microsoft Visual Basic C++, if asked - > Select "Next >" 11. Completing the Celec bootloader Setup Wizard. Verify that "Launch Celec bootloader" is checked - > Select "Finish >" 11. ***This screen will appear… 12. Attach the programmer to the computer using a standard Male USB to Male Mini-USB cable (see below). ***This screen will appear… 12.
13. Screen to the right opens. (Look in folder that was created in Step 1 if Hex file does not appear on the screen) -> Select "Open >" 13. 14. Select "Program / Verify" 15. When you see "Erase / Program / Verify Completed” the programming is complete and you can unplug the programmer from the computer. 14. 16. After unplugging the programmer, the display should now read “CELEC V 1.2 AMSTD” 15.
