Exploded Parts

ManualsBrandsAmerican Standard ManualsPlumbingSelectronic 0.5 GPF Exposed Urinal Flush Valve for 3/4" Top Spud Installation

Installation Instructions

(In Toronto Area only: 1-905-3061093)

Certiﬁed to comply with ASME A112.19.2M

NOTE TO INSTALLER: Please give this manual to the customer after installation.

Exposed Flushometer

for 3/4" Top Spud Urinals

CLOG RESISTANT

• Self-cleaning piston valve prevents clogging and reduces maintenance.

ONE SENSOR FITS ALL

• Only 1 sensor for entire Selectronic™ line of faucets, urinals, and ush valves.

• Range can be adjusted manually or with optional remote control.

M965218 REV 1.6

6062.013

6062.025

6062.051

6062.101

6061.013

6061.025

6061.051

6061.101

MODEL NUMBERS

To lear n more about Amer i c a n S tandard Fa u c e t s v i s i t o u r website a t : www.americanstandard-us.com

or U.S. customer's e-mail us at: faucetsupport@americanstandard.com

For Parts, Service, Warranty or other Assistance,

please call

1-800-442-1902 (In Canada: 1-800-387-0369)

(In Toronto Area only: 1-905-3061093)

SELECTRONIC

HARD-WIRED AC POWERED PROXIMITY

URINAL FLUSH VALVE

0.125, 0.25, 0.5 & 1.0 GPF

Summary of content (11 pages)

PAGE 1
I n s t a l l a t i o n I n s t ru c t i o n s SELECTRONIC® MODEL NUMBERS HARD-WIRED AC POWERED PROXIMITY URINAL FLUSH VALVE 0.125, 0.25, 0.5 & 1.0 GPF 6062.013 6062.025 6062.051 6062.101 6061.013 6061.025 6061.051 6061.101 Exposed Flushometer for 3/4" Top Spud Urinals CLOG RESISTANT • Self-cleaning piston valve prevents clogging and reduces maintenance. ONE SENSOR FITS ALL • Only 1 sensor for entire Selectronic™ line of faucets, urinals, and flush valves.
PAGE 2
Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years.To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin. UNPACKING All American Standard Products Are Water Tested At Our Factory. Some Residual Water May Remain In The Valve During Shipping. 1. Remove the Flush Valve items from the carton. The illustration below shows all items after they have been removed from the carton.
PAGE 3
Fig. 1 Hubbel-RACO 8192 4" ELECTRICAL BOX OR EQUIVALENT BY CONTRACTOR Roughing-in Dimensions SELECTRONIC™ PROXIMITY TOILET FLUSH VALVE Exposed Flushometer for 3/4" Top Spud Fixtures 180˚ DETECTION ZONE 400mm-800mm (15-3/4" TO 31-1/2") 72mm (2-7/8") MANUAL OVERRIDE BUTTON GENERAL DESCRIPTION: 45˚ 305mm (12" MAX.) 51mm (2") HOLE FOR CONDUIT FINISHED WALL 15˚ 116mm (4-5/8") 86mm (3-3/8) Exclusive, self cleaning piston-type flush valve with proximity operation and manual override.
PAGE 4
1 INSTALL ELECTRICAL BOX ASSEMBLY; Fig. 3 Fig.3 (TOP SPUD FIXTURE ILLUSTRATED) 1. Drill a 2" diameter hole in the finished wall for the conduit tube from the flush valve at the dimension shown. Fig.3. 2. Cut a 127x127mm (5"x 5") opening in finished wall for ELECTRICAL BOX (1) (not supplied) at the dimensions shown. 3. Feed SENSOR CABLE (2) through wall opening and out 2" diameter hole. Important: Make sure the smaller end of the SENSOR CABLE (2) goes through the 2" diameter hole.
PAGE 5
Fig.4c Hubbel-RACO 8192 4" ELECTRICAL BOX OR EQUIVALENT BY CONTRACTOR 3 4 7 1 4 7 5 6 4 7 5 5 6 6 2 BLACK & WHITE POWER CONNECTIONS Unit #1 Unit #2 Unit #3 3 FOR AC-VERSION (MULTI HOOK-UP); Fig. 4c 1. Contractor to supply ELECTRICAL BOX (1). Mount POWER SUPPLY (2) into ELECTRICAL BOX (1). Connect White and Black power connections to POWER SUPPLY. 2. Connect the POWER CABLE (3) from the power supply to the SPLITTER (4). 3.
PAGE 6
4 INSTALL THE SWEAT SOLDER ADAPTER; Fig. 5 CAUTION Fig.5 FINISHED WALL Turn water supplies off before beginning A Note: Install Optional Sweat Solder Adapter (Supplied) for copper pipe supply line. Fig. 5. (A-B)= C 1. Measure the distance (A) from the finished wall to the center of the inlet spud on the fixture. B CENTER LINE OF FIXTURE SPUD 32mm (1-1/4") FILE EDGES 2. Cut the supply pipe 1-1/4" (A-B=C) shorter then the measurement taken in Step 1.
PAGE 7
FLUSH OUT SUPPLY LINES; Fig. 8 Fig. 8 2 1. Remove COVER (1) from SUPPLY STOP (2). REMOVE COVER 2. With a flat blade screwdriver open SUPPLY STOP (2). 1 3. Turn on water supply to flush line of any debris or sediment. 2 4. Close SUPPLY STOP (2) and replace COVER (1). COUNTER-CLOCKWISE OPENS CONTROL STOP CLOCKWISE CLOSES CONTROL STOP 883 LEFT OR RIGHT HAND INSTALLATION; Fig. 9 Fig. 9 The UNIT is shipped with the inlet flange on the right side.
PAGE 8
10 INSTALL FLUSH VALVE; Fig. 10b Fig. 10b 121mm,+13mm, -6mm (4-3/4)(+1/2, -1/4) 1. Pull the DOWN TUBE (7) up to meet the threaded FLUSH VALVE CONNECTION (8) and hand tighten the VACUUM BREAKER COUPLING NUT (6). Align all components of the flush valve assembly. Fig. 10b. 2. Lightly tighten the COUPLING NUT (5) connection first, then the VACUUM BREAKER COUPLING NUT (6) and finally the SPUD COUPLING NUT (9). Once alligned correctly, use a wrench to tighten couplings to make water tight connections. Fig.
PAGE 9
13 HOW TO SET DETECTION RANGE Fig. 13 (If Required) ; Fig. 13 & 14 1 Note: The detection distance is preset and is ideal for most installations. Should an adjustment be required follow the steps below. 1. To remove the FRONT PANEL (1), insert WIRE KEY (2) (supplied) into the two holes located at the bottom of the FRONT PANEL (1). Push the WIRE KEY (2) up until it releases the bottom clips. Pull the bottom edge away and lift the FRONT PANEL (1) off. Fig. 13a. 2 Fig. 13a 2.
PAGE 10
9 M965218 REV 1.6 NO NO NO NO 1. CLOSE STOP VALVE, 2. REPLACE SOLENOID KIT. 3. RE-ASSEMBLE AND INSTALL UNIT. 4. OPEN STOP VALVE. YES TEST SENSOR. DISCONNECT SENSOR CABLE FROM COVER AND RE-CONNECT. SENSOR SHOULD FLASH FOR 5 SECONDS. DOES IT FLASH? NO 1. COVER SENSOR FOR 10 SECONDS 2. UNCOVER SENSOR FOR 10 SECONDS.
PAGE 11
SELECTRONIC® HARD-WIRED AC POWERED PROXIMITY URINAL FLUSH VALVE 0.125, 0.25, 0.5 & 1.0 GPF M950520-0070A POWER SUPPLY MODEL NUMBERS 6062.013 6062.025 6062.051 6062.101 M964120-0020A ESCUTCHEON & CONDUIT ASSEMBLY M964107-0020130A COVER ASSEMBLY FOR FLUSH VALVE WITH 0.125 gpf M964107-0020300A COVER ASSEMBLY FOR FLUSH VALVE WITH 0.25 gpf M918004-0070A WALL FLANGE SET SCREW A917376-0070A COVER SET SCREW M964107-0020500A COVER ASSEMBLY FOR FLUSH VALVE WITH 0.