Installation Sheet

ManualsBrandsAmerican Standard ManualsCommercial ProductsAmerican Standard Selectronic 1.0 GPF 3/4" Top Spud Mounted Electronic Flushometer

Installation Instructions

Certied to comply with ASME A112.19.2

NOTE TO INSTALLER: Please give this manual to the customer after installation.

To learn more about American Standard Selectronic

Products visit our website at: www.americanstandard-us.com

or e-mail us at: CRTTEAM@americanstandard.com

For Parts, Service, Warranty or other Assistance,

please call (844) CRT-TEAM / (844) 278-8326 (In Canada: 1-800-387-0369)

(In Toronto Area only: 1-905-306-1093)

SELECTRONIC

EXPOSED URINAL FLUSH VALVE

AC POWERED PROXIMITY

0.125 0.25 0.5 & 1.0 GPF

Exposed Flushometer

for 3/4" Top Spud Urinals

COVER PLATE

(Required for Front Installation Only)

MODEL NUMBERS

606B.101 606B.051 606B.025 606B.013

M965645 EN REV. 1.7 (5/17)

CAUTION: Use only American Standard supplied

transformers and cable sets. Using non-AS supplied

cables, or cutting, splicing or modifying any components

will void the warranty.

Summary of content (13 pages)

PAGE 1
Installation Inst ru ct io n s SELECTRONIC® EXPOSED URINAL FLUSH VALVE AC POWERED PROXIMITY 606B.101 MODEL NUMBERS 606B.051 606B.025 606B.013 0.125 0.25 0.5 & 1.0 GPF COVER PLATE (Required for Front Installation Only) Exposed Flushometer for 3/4" Top Spud Urinals CAUTION: Use only American Standard supplied transformers and cable sets. Using non-AS supplied cables, or cutting, splicing or modifying any components will void the warranty. Certified to comply with ASME A112.19.
PAGE 2
Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin. UNPACKING All American Standard Products Are Water Tested At Our Factory. Some Residual Water May Remain In The Valve During Shipping. Remove the Flush Valve items from the carton. The illustration below shows all items after they have been removed from the carton.
PAGE 3
Fig. 1 (Before November 2017) Roughing-in Dimensions (Front Installation Shown) GENERAL DESCRIPTION: Right or Left Hand Installation SELECTRONIC® PROXIMITY URINAL FLUSH VALVE Exposed Flushometer for 3/4" Top Spud Fixtures See (Section 5) for converting Flush Valve to Left Hand Installation. SEE DETAIL “A” FINISHED WALL CAUTION: Use only American Standard supplied transformers and cable sets. Using non-AS supplied cables, or cutting, splicing or modifying any components will void the warranty.
PAGE 4
RECOMMENDED TOOLS; Fig. 2. Fig. 2 1. Teflon Tape 2. Flat Blade Screwdriver 3. Adjustable Wrench 4. Tape Measure 5. Hacksaw 6. Tubing Cutter 7. File 8. For Sweat Connection; Solder and Torch 9. 2.5 mm Hex Wrench 10. 1.5 mm Hex Wrench 2 1 3 4 10' 6 8 5 7 PRIOR TO INSTALLATION 9 10 • Flush all water lines prior to operation. Dirt and debris can cause flush valve to run continuously. Note: Prior to installing the Selectronic™Flush Valve the following items must be installed. 1. Urinal 2.
PAGE 5
FLUSH VALVE INSTALLATION Fig.3 FINISHED WALL 1 INSTALL SWEAT ADAPTER; Fig. 3 CAUTION A Turn water supplies off before beginning (A-B)= C Note: Install Optional Sweat Adapter (Supplied) for copper pipe supply line. 1. M easure the distance (A) from the finished wall to the center of the inlet spud on the fixture. B 32mm (1-1/4") FILE EDGES 2. Cut the supply pipe 1-1/4" (A-B=C) shorter than the measurement taken in Step 1. File any rough edges off the end of the supply pipe. CLEAN ADAPTER 3.
PAGE 6
F LUSH OUT SUPPLY LINES; Fig. 6 4 Fig. 6 2 1. R emove STOP VALVE COVER (1) from STOP VALVE (2). REMOVE COVER 2. Open STOP VALVE (2) with a flat blade screwdriver. 1 3. Turn on water supply to flush line of any debris or sediment. 2 4. Close STOP VALVE (2) and replace STOP VALVE COVER (1). 5 COUNTER-CLOCKWISE OPENS STOP VALVE LEFT OR RIGHT HAND INSTALLATION; Fig. 7 CLOCKWISE CLOSES STOP VALVE The unit is shipped with the adjustable tailpiece on the right side.
PAGE 7
ELECTRICAL INSTALLATION Fig.9 (TOP SPUD FIXTURE ILLUSTRATED) Hubbel-RACO #256 OR EQUAL (BY CONTRACTOR). ELECTRICAL BOX 7 INSTALL Hubbel-RACO 779 OR EQUAL (BY CONTRACTOR). (BY OTHERS); Fig. 9 1 305mm (12" MAX.) FOR FRONT INSTALLATION (with cover plate) Note: The ELECTRICAL BOX (1) can be installed in any location along the marked arc. (51mm) 2" DIA.
PAGE 8
Fig.10b 2a Unit #1 Unit #2 Already installed 3 Unit #3 2 1 BLACK & WHITE POWER CONNECTIONS (See electrical installation instructions, page 5) *MAXIMUM OF 15 UNITS PER TRANSFORMER. 10' MAXIMUM CABLE LENGTH BETWEEN UNITS. 8b MULTI-AC VERSION (DAISY-CHAIN); Fig. 10b. CAUTION Ensure that the line power to bathroom is OFF prior to making connections. Important: All cover plates must be uninstalled before beginning to make daisy-chain connections.
PAGE 9
INSTALL CONDUIT, ESCUTCHEON Fig. 11 AND SENSOR CABLE; Fig. 11 4 1. Drill a 2" diameter hole (shown in Fig. 9) in the finished wall for the CONDUIT (2). Finished Wall 2. Slide ESCUTCHEON (1) onto CONDUIT (2). 4. Make sure 10' EXTENSION CABLE (6), 27" EXTENSION CABLE (3), CONNECTOR LOCKING DEVICE (7), and CONDUIT (2) are inserted through the 2" diameter hole in the wall. 10' 2" Diameter Hole for Conduit 5 5.
PAGE 10
B SET DETECTION RANGE Fig. 13 (if Required); Fig. 13 & 14 1 Note: The detection distance is preset and ideal for most installations. Should an adjustment be required, follow the steps below. 1. To remove the COVER PLATE (1), insert WIRE KEY (2) (supplied) into the two holes located at the bottom of the COVER PLATE (1). Push the WIRE KEY (2) up until it releases the bottom clips. Pull the bottom edge away and lift the COVER PLATE (1) off. Fig. 13. 2 2.
PAGE 11
TROUBLESHOOTING FLOW CHARTS UNIT DOES NOT FUNCTION IS ANGLE STOP OPEN? NO OPEN VALVE YES LOW VOLTAGE. TEST OUTPUT OF TRANSFORMER. MUST BE >5.4 VAC. YES REPEATED DOUBLE FLASH ON SENSOR? NO RECONNECT TRANSFORMER TO SENSOR. FLASH ON SENSOR FOR 5 SECONDS? 1 2 NO 1 NO 2 BAD TRANSFORMER. REPLACE. REPEAT. DAMAGED SENSOR. REPLACE SENSOR. YES PUSH MANUAL OVERRIDE BUTTON; WILL THE UNIT FLUSH? DAMAGED SOLENOID. REPLACE SOLENOID YES NO REPLACE PISTON ASSEMBLY.
PAGE 12
BEFORE NOVEMBER 2017 SELECTRONIC® AC POWERED PROXIMITY EXPOSED URINAL FLUSH VALVE 0.125 0.25 0.5 & 1.0 GPF M964120-0020A ESCUTCHEON & CONDUIT ASSEMBLY 606B.101 MODEL NUMBERS 606B.051 606B.025 606B.013 M964943-0020130A COVER ASSEMBLY (0.125 gpf) M918004-0070A WALL FLANGE SET SCREW A917376-0070A SET SCREW M964943-0020250A COVER ASSEMBLY (0.25 gpf) M964015-0020A COVER PLATE ASSEMBLY M964943-0020500A COVER ASSEMBLY (0.5 gpf) M964943-0021000A COVER ASSEMBLY (1.
PAGE 13
AFTER NOVEMBER 2017 SELECTRONIC® AC POWERED PROXIMITY EXPOSED URINAL FLUSH VALVE 0.125 0.25 0.5 & 1.0 GPF M964120-0020A ESCUTCHEON & CONDUIT ASSEMBLY 606B.101 MODEL NUMBERS 606B.051 606B.025 606B.013 M970345-0020130A COVER ASSEMBLY (0.125 gpf) M918004-0070A WALL FLANGE SET SCREW A917376-0070A SET SCREW M970345-0020250A COVER ASSEMBLY (0.25 gpf) M964015-0020A COVER PLATE ASSEMBLY M970345-0020500A COVER ASSEMBLY (0.5 gpf) M970345-0021000A COVER ASSEMBLY (1.