Installation Guide

BEFORE YOU BEGIN
SAVE FOR FUTURE USE
7302379-100 11/18
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
Product names listed herein are trademarks of AS America Inc.
© AS America Inc. 2018
NOTES:
• Pictures may not exactly define contour of china and components.
• Observe all local plumbing and building codes.
• Refer to local codes and manufacturer’s instructions for flush valve requirements.
• Carefully inspect the new urinal for damage.
• Fixture dimensions are nominal and conform to tolerances by ASME Standard A112.19.2.
• Site preparation may require additional tools and hardware.
Thank you for selecting American Standard – the benchmark of fine quality for over 100 years. To ensure this product is
installed properly, please read these instructions carefully before you begin. (Certain installations may require professional
help.) Also be sure your installation conforms to local codes.
!
6516 Top Spud & 6517 Back Spud Series
6516 Top Spud 6517 Back Spud
Greenbrook Urinal
INSTALLATION INSTRUCTIONS
C/L OF OUTLET
3/4" SPUD
FINISHED
FLOOR
697 mm
(27-1/2")
102 mm
(4")
121 mm
(4/3/4")
411 mm
(16-1/8")
212 mm
(8-3/8")
420 mm
(16-1/2")
MANUAL
OVERRIDE
BUTTON
SUPPLY DN 20 mm
(3/4" I.P.S.)
292 mm
(11-1/2")
108 mm to 133 mm
(4-1/4" to 5-1/4")
FINSHED WALL
285 mm
(11-1/4")
380 mm
(15")
50 mm
(2")
419 mm
(16-1/2")
15
432mm (17")
MAXIMUM
610mm (24")
OPTIONAL
TO FINISHED
FLOOR
13mm
(1/2")
13mm
(1/2")
102mm
(4")
GASKET
2" N.P.T.
INSIDE THREADS
DETAIL OF OUTLET CONNECTION
FINISHED
WALL
8mm x 25 mm
(5/16" x 1") SLOT
K2 HANGERS
446 mm
(17-1/2")
C/L OF OUTLET
8mm x 25 mm
(5/16" x 1") SLOT
K2 HANGERS
FINISHED
FLOOR
697 mm
(27-1/2")
102 mm
(4")
121 mm
(4/3/4")
411 mm
(16-1/8")
212 mm
(8-3/8")
420 mm
(16-1/2")
446 mm
(17-1/2")
FINSHED WALL
285 mm
(11-1/4")
380 mm
(15")
432mm (17")
MAXIMUM
610mm (24")
OPTIONAL
TO FINISHED
FLOOR
13mm
(1/2")
13mm
(1/2")
102mm
(4")
GASKET
2" N.P.T.
INSIDE THREADS
DETAIL OF OUTLET CONNECTION
FINISHED
WALL
55 mm
(2-1/8")
67 mm
(2-5/8")
RECOMMENDED TOOLS AND MATERIALS
Safety Glasses Tape Measure Adjustable Wrench Pencil Hole Cutting Equipment
Thread Sealant 1/4" Ratchet Blade Screwdriver Levels