Installation Sheet

RECOMMENDED TOOLS AND MATERIALS
Safety Glasses Tape Measure Adjustable Wrench Blade Screwdriver Pencil Levels
Thread Sealant 1/4" Ratchet Hole Cutting Equipment
BEFORE YOU BEGIN
SAVE FOR FUTURE USE
7301812-100
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
Product names listed herein are trademarks of AS America Inc.
© AS America Inc. 2015
NOTES:
• Pictures may not exactly define contour of china and components.
• Observe all local plumbing and building codes.
• Refer to local codes and manufacturer’s instructions for flush valve requirements.
• Carefully inspect the new urinal for damage.
• Fixture dimensions are nominal and conform to tolerances by ASME Standard A112.19.2.
• Site preparation may require additional tools and hardware.
Thank you for selecting American Standard – the benchmark of fine quality for over 100 years. To ensure this product is
installed properly, please read these instructions carefully before you begin. (Certain installations may require professional
help.) Also be sure your installation conforms to local codes.
!
6581 SERIES
MAYBROOK
®
URINAL
INSTALLATION INSTRUCTIONS
292mm
(11- 1/2")
324mm
(12-3/4")
121mm
(4-3/4")
19mm (3/4") N.P.T. OR C.W.T.
SUPPLY TO FLUSH VALVE
K-2
HANGER
298mm
(11- 3/4")
457mm
(18")
133mm
(5-1/4")
10mm (3/8")
D. HOLES
171mm
(6-3/4")
38mm (1-1/2")
O.D. WASTE
38mm (1-1/2")
O.D. TAILPIECE
32mm
(1-1/4")
SUGGESTED
*
298mm
(11-3/4")
292mm
(11-1/2")
324mm
(12-3/4")
19mm (3/4")
SPUD
64mm
(2-1/2")
FINISHED WALL
178mm
(7")
610mm
(24
")
OPTIONAL
TO FINISHED
FLOOR
*
P-TRAP SOLD
SEPARATELY