Installation Guide

BEFORE YOU BEGIN
SAVE FOR FUTURE USE
7301778-100 Rev. B 8/18
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
Product names listed herein are trademarks of AS America Inc.
© AS America Inc. 2018
NOTES:
• Pictures may not exactly define contour of china and components.
• Observe all local plumbing and building codes.
• Refer to local codes and manufacturer’s instructions for flush valve requirements.
• Carefully inspect the new urinal for damage.
• Fixture dimensions are nominal and conform to tolerances by ASME Standard A112.19.2.
• Site preparation may require additional tools and hardware.
Thank you for selecting American Standard – the benchmark of fine quality for over 100 years. To ensure this product is
installed properly, please read these instructions carefully before you begin. (Certain installations may require professional
help.) Also be sure your installation conforms to local codes.
!
6590 & 6515 SERIES
Top Spud Back Spud
WASHBROOK URINAL
INSTALLATION INSTRUCTIONS
13mm
(1/2")
102mm
(4")
GASKET
2" N.P. T.
INSIDE THREADS
DETAIL OF OUTLET CONNECTION
FINISHED WALL
13mm
(1/2")
121mm
(4-3/4")
3/4"
SPUD
3/4" S.P. S.
OR 3/4" C.W.T.
SUPPLY TO
FLUSH VALVE
445mm
(17-1/2")
664mm
(26-1/8")
REF.
464mm
(18-1/4")
292mm
(11-1/2")
83mm
(3-1/4")
102mm
(4")
480mm
(18-7/8")
343mm
(13-1/2")
C/L OF
OUTLET
K2 HANGERS
8mm x 25mm
(5/16" x 1")
SLOT
64mm
(2-1/2")
235mm
(9-1/4")
360mm
(14-1/8")
2" N.P. T.
FEMALE OUTLET
CONNECTION
13mm
(1/2")
FINISHED FLOOR
FINISHED
WALL
432mm
(17") MAX
610mm (24")
OPTIONAL
51mm
(2")
13mm
(1/2")
102mm
(4")
GASKET
2" N.P. T.
INSIDE THREADS
DETAIL OF OUTLET CONNECTION
FINISHED WALL
13mm
(1/2")
445mm
(17-1/2")
664mm
(26-1/8")
REF.
464mm
(18-1/4")
83mm
(3-1/4")
102mm
(4")
480mm
(18-7/8")
343mm
(13-1/2")
C/L OF
OUTLET
K2 HANGERS
8mm x 25mm
(5/16" x 1")
SLOT
235mm
(9-1/4")
360mm
(14-1/8")
2" N.P. T.
FEMALE OUTLET
CONNECTION
13mm
(1/2")
FINISHED FLOOR
FINISHED
WALL
432mm
(17") MAX
610mm (24")
OPTIONAL
3/4"
SPUD
51mm
(2")
RECOMMENDED TOOLS AND MATERIALS
Safety Glasses Tape Measure Adjustable Wrench Pencil Hole Cutting Equipment
Thread Sealant 1/4" Ratchet Blade Screwdriver Levels