Specification

ManualsBrandsAmerican Standard ManualsBathGreen Tea 4 in. Centerset 2-Handle Low-Arc Bathroom Faucet in Satin Nickel with Pull-Out Spout

C69

GREEN TEA™

TWO-HANDLE CENTERSET LAVATORY FAUCET

WITH PULL-OUT SPOUT

PRODUCT FEATURES:

Ceramic Disc Valve Cartridges: Assures a lifetime of

drip-free performance.

Cast Brass Valve Bodies: Strong and durable.

Low Lead:

Meets NSF Standard 61/Section 9 & Prop 65 lead

requirements.

Integral Check Valves: Prevents backflow.

Exclusive Speed Connect Metal Drain:

• Fewer Parts - installs in less time.

• No adjustments required - seals the first time, every time.

• Flexible stainless steel cable - installs effortlessly in tight spaces.

Choice of Finishes: Available in Polished Chrome or

Stainless Steel (PVD).

MODEL NUMBER:

7010.201 Centerset Lavatory

with Pull-Out Spout

Metal Speed Connect

Pop-up drain.

Metal Lever handles.

CODES AND STANDARDS

These products meet or exceed the following

codes and standards:

ANSI A117.1

ASME A112.18.1

CSA B 125

NSF 61/Section 9

Product

Number

Description

7010.201

Lavatory faucet with Metal Speed Connect

Pop-up drain. Metal Lever handles.

Meets the American Disabilities Act Guidelines and ANSI A117.1

Requirements for the physically challenged.

GENERAL DESCRIPTION:

Centerset lavatory faucet on 4" centers. 1/4 turn

washerless ceramic disc valve cartridges. Durable cast

brass valve bodies with one-half inch male inlet shanks.

Metal body. Brass pull-out spray spout (can be locked to

spout base if desired). Hose is 1250mm (4') long with

625mm (2') reach. Complete with two integral check valves.

Metal lever handles. 20 inch (500mm) long flexible stainless

steel drain cable is pre-assembled to faucet body. Metal

Speed Connect

drain body with 1-1/4 inch (32mm) tail piece.

1.5 gpm/5.7L/min. maximum flow rate.

Finish Options

Polished

Chrome

002

PVD

Stainless

Steel

075

SUGGESTED SPECIFICATION:

Two-handle 4" centerset lavatory faucet shall feature a pull-out spout with two check valves and cast brass valve

bodies. Shall also feature 1/4 turn washerless ceramic disc valve cartridges. Shall also feature a metal drain body with

stainless steel cable actuation. Fitting shall be American Standard Model # 7010.201.____.

124mm

(4-7/8)

93mm

(3-11/16)

157mm

(6-3/16)

37mm

(1-1/2)

102mm

(4)

245mm

(9-5/8)

125mm

(4-15/16)

32mm OD

(1-1/4 OD)

64mm

(2-1/2)

103mm

(4-1/16)

PULL-OUT

SPOUT FEATURE

FLOW RATE*

GALLONS PER MINUTE

I N L E T P R E S S U R E ( P S I )

*Flow rates shown are for mixed hot and cold.

0.0

0.5

1.0

1.5

2.0

10080604020

Summary of content (2 pages)

PAGE 1
GREEN TEA™ TWO-HANDLE CENTERSET LAVATORY FAUCET WITH PULL-OUT SPOUT MODEL NUMBER: 7010.201 Centerset Lavatory with Pull-Out Spout Metal Speed Connect® Pop-up drain. Metal Lever handles. PULL-OUT SPOUT FEATURE 245mm (9-5/8) 103mm (4-1/16) 125mm (4-15/16) 64mm (2-1/2) 93mm (3-11/16) 37mm (1-1/2) 32mm OD (1-1/4 OD) 102mm (4) 124mm (4-7/8) 157mm (6-3/16) GENERAL DESCRIPTION: PRODUCT FEATURES: Centerset lavatory faucet on 4" centers. 1/4 turn washerless ceramic disc valve cartridges.
PAGE 2
GREEN TEA™ TWO-HANDLE CENTERSET LAVATORY FAUCET WITH PULL-OUT SPOUT CODES AND STANDARDS FLOW RATE* 2.0 GALLONS PER MINUTE These products meet or exceed the following codes and standards: ANSI A117.1 ASME A112.18.1 CSA B 125 NSF 61/Section 9 1.5 1.0 0.5 0.0 20 40 60 80 100 INLET PRESSURE (PSI) *Flow rates shown are for mixed hot and cold. Finish Options Product Number Description 7010.201 Lavatory faucet with Metal Speed Connect® Pop-up drain. Metal Lever handles.