Installation & Assembly

5
M965255 REV. 1.6
1. Remove the FAUCET COVER (1) by unthreading the
LEVER SCREW (2) and pulling off the LEVER
HANDLE (3). Unthread the FAUCET COVER SCREW
(4) at the back of the FAUCET. Pull FAUCET COVER
(1) up and off. See Fig. 2 in this section.
2. Remove BATTERY HOLDER (1) from FAUCET
BODY (2).
3. Remove old battery from the BATTERY HOLDER (1).
4. Install NEW BATTERY (3) into the BATTERY
HOLDER (1). Replace BATTERY HOLDER (1) into the
FAUCET BODY (2).
5. Replace FAUCET COVER (1) and LEVER HANDLE
(3). Install LEVER HANDLE SCREW (2), FAUCET
COVER SCREW (4) and tighten. See Fig. 2 in this
section.
HOW TO INSTALL AND CHANGE
BATTERY; Fig. 5
3
1. Remove the FAUCET COVER (1) by unthreading the
LEVER SCREW (2) and pulling off the LEVER
HANDLE (3). Unthread the FAUCET COVER SCREW
(4) at the back of the FAUCET. Pull FAUCET COVER
(1) up and off. See Fig. 2 in this section.
2. Disconnect both WIRE CONNECTIONS. Fig. 6.
3. Untighten SENSOR SCREW (1) with a 2.5mm HEX
WRENCH. Remove SENSOR ASSEMBLY (2) from
FAUCET BODY (3). Remove SENSOR (2a) from
CARRIER (4) and replace with new SENSOR (2a).
Install SENSOR ASSEMBLY (2) into FAUCET BODY
(3). Tighten SENSOR SCREW (1). Fig. 7, 8.
4. Replace FAUCET COVER (1) and LEVER HANDLE (3).
Install LEVER HANDLE SCREW (2), FAUCET COVER
SCREW (4) and tighten. See Fig. 2 in this section.
HOW TO REPLACE SENSOR;
Fig. 6, 7, & 8.
4
Fig. 5
1
2
3
1
Fig. 6
Fig. 7
Fig. 8
DISCONNECT
WIRE CONNECTIONS
2
2a
4
3
2.5mm HEX
WRENCH