Installation Guide

- 3 -
6
7
DO: CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A
CLOTH WITH A COARSE SURFACE.
CARE INSTRUCTIONS:
5
M965767 (9/16)
SPRAY OPERATION
• With FAUCET on press TOGGLE
BUTTON (4) on SPRAY (3) to
switch from stream to spray.
• Press and hold PAUSE BUTTON (5)
to temporarily stop ow from
SPRAY (3). Release PAUSE
BUTTON (5) to resume ow
fromSPRAY (3).
SERVICE
If faucet drips, operate HANDLE several times
from “off” to “on.” Do not apply excessive force.
Clogged CARTRIDGE outlets or inlets may
cause reduced flow.
To clean, rst turn off water supply then:
• Loosen HANDLE SCREW (1) and
remove HANDLE (2).
• Unthread the ESCUTCHEON CAP (3).
Unthread three MOUNTING SCREWS (4).
• Lift CARTRIDGE (5) off MANIFOLD (6).
• Clean MANIFOLD (6) and
CARTRIDGE (5) ports.
• Place CARTRIDGE (5) onto
MANIFOLD (6) and
tighten MOUNTING SCREWS (4)
alternately.
• Replace SNAP RING (3), HANDLE (2),
tighten HANDLE SCREW (1).
TEST INSTALLED FAUCET
• Move HANDLE (1) into “off” position.
• Turn on water supplies.
• Check connection for leaks. (See Section 4)
• With HANDLE (1) in “off” position, unthread
SPRAY (3) from HOSE (2).
• Operate handle back to front, in COLD
and HOT positions, to ush water lines
thoroughly.
• Replace SPRAY (3) onto HOSE (2).
STREAM
(AERATOR)
SPRAY
5
3
4
1
3
2
REMOVE
COLD
ON
OFF
HOT
1
2
3
4
5
6