Installation Guide

- 1 -

Product names listed herein are trademarks of AS America, Inc.

Thank you for selecting American Standard...

the benchmark of ﬁne quality for over 100 years.

To ensure that your installation proceeds smoothly-please

read these instructions carefully before you begin.

RECOMMENDED TOOLS

M965763 (9/16)

COLONY

PRO

DUAL CONTROL BAR FAUCET

INSTALLATION

INSTRUCTIONS

7074.400

Plumbers’ Putty

or Caulking

Adjustable Wrench Channel Locks

Phillips Screwdriver

Certied to comply with ANSI A112.18.1M

• Install FAUCET (1) on lavatory. (No sealant

is required unless mounting deck on lavatory

is uneven).

INSTALL FAUCET

CAUTION

Turn off hot and cold water

supplies before beginning.

• NOTE: Flexible supplies have to be purchased

separately.

• Secure FAUCET (1) with ATTACHMENT NUTS (2)

supplied. (HAND TIGHTEN).

• Connect water supply to FAUCET (1) with 1/2” IPS

FLEXIBLE SUPPLIES (3) or 3/8” O.D. BULL-NOSE

RISERS (4). Use adjustable wrench to tighten

connections. Do not over tighten. Be careful not to

kink copper supply when bending. Use tubing cutter

to cut to proper length.

SECURE FAUCET AND MAKE WATER

SUPPLY CONNECTIONS

FERRULE

COUPLING NUT

(HAND TIGHTEN)

PAGE 1
INSTALLATION INSTRUCTIONS 7074.400 COLONY® PRO DUAL CONTROL BAR FAUCET Thank you for selecting American Standard... the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin. Certified to comply with ANSI A112.18.
PAGE 2
3 TEST INSTALLED FAUCET • Remove AERATOR. With handles in OFF position, turn on water supplies and check all connections for leaks. • Operate both handles to flush water lines thoroughly. Replace AERATOR. AERATOR 4 SERVICE CAUTION Turn off hot and cold water supplies before beginning. If Faucet Drips, Proceed As Follows: • Turn HANDLES to OFF position. • If spout drips, operate HANDLES several times from OFF to ON position. Do not force HANDLES they turn only 90˚.
PAGE 3
COLONY® PRO DUAL CONTROL BAR FAUCET MODEL NUMBER 7074.400 M922923-0070A AERATOR M970226-YYY0A HANDLE (LEFT & RIGHT) M964323-0070A PLUG BUTTON M970215-YYY0A SPOUT KIT M964005-0070A CARTRIDGE KIT M970216-0070A SPOUT SEAL KIT M970217-YYY0A ESCUTCHEON & PUTTY PLATE Replace the “YYY” with appropriate finish code POLISHED CHROME 002 STAINLESS STEEL 075 065800-0070A ATTACHMENT NUT HOT LINE FOR HELP For toll-free information and answers to your questions, call: 1 (800) 442-1902 Mon. - Fri. 8:00 a.m.