Double Bowl Sink, Single Bowl Sink Specification Sheet

G49
© 2008 AS America Inc.
DOUBLE BOWL KITCHEN SINK
• Acid-resisting enameled steel
• Double bowl design
• Top mount installation
• Available in 3 or 4 faucet hole congurations
• Silicone sealant supplied
Top Mount:
❏ 7144.803 3-Hole
❏ 7144.804 4-Hole
Nominal Dimensions:
838 x 559 x 184mm
(33" x 22" x 7-1/4")
Bowl sizes:
359mm (14-1/8") wide
413mm (16-1/4") front to back
178mm (7") deep
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.4M for Enameled Steel Plumbing
Fixtures
SINGLE BOWL KITCHEN SINK
• Acid-resisting enameled steel
• Single bowl design
• Acid-resisting glossy porcelain nish
• Top mount installation
• Available in 3 or 4 faucet hole congurations
• Silicone sealant supplied
Top Mount:
❏ 7143.803 3-Hole
❏ 7143.804 4-Hole
Nominal Dimensions:
635 x 559 x 184mm
(25" x 22" x 7-1/4")
Bowl sizes:
552mm (21-3/4") wide
413mm (16-1/4") front to back
178mm (7") deep
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.4M for Enameled Steel Plumbing
Fixtures
* See faucet section for available models
To Be Specied:
❏ Color: (specify 208 White Heat or 345 Bisque)
❏ Faucet*: (specify nish)
❏ Basket Strainer: 4331.013 (Chrome only)
❏ Soap Dispenser*: 4503.115 (specify color)
❏ Trap:
Optional Accessories:
❏ Large Wood Cutting Board: 9000.250
❏ Small Wood Cutting Board: 9000.185
❏ Colander For Cutting Board: 8102.100, Color:
❏ Large Colander: 8103.100, Color:
DOUBLE BOWL SINK
SINGLE BOWL SINK
ENAMELED STEEL
SEE REVERSE SIDE FOR ROUGHING-IN DIMENSIONS
Revised 2/08
Enameled Steel Double Bowl Sink
Enameled Steel Single Bowl Sink