Double Bowl Sink, Single Bowl Sink Specification Sheet

© 2003 American Standard Inc.
KS-55
DOUBLE BOWL™ SINK
SINGLE BOWL™ SINK
ENAMELED STEEL
DOUBLE BOWL KITCHEN SINK (shown)
❏ 7144.803 3-Hole
❏ 7144.804 4-Hole
❏ 7144.805 5-Hole
Product Features:
• Acid-resisting enameled steel
• Double bowl design
• Self-rimming installation
• Available in 3, 4 or 5 faucet hole configurations
• Silicone sealant supplied
Nominal Dimensions: 838 x 559 x 184mm
(33" x 22" x 7-1/4")
Bowl sizes:
359mm (14-1/8") wide, 413mm (16-1/4") front
to back, 178mm (7") deep
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.4M for Enameled Steel Plumbing
Fixtures
To Be Specified
❏ Color: (specify White Heat,Bone, or Bisque)
❏ Faucet*: (specify finish)
❏ Basket Strainer: 4331.013 (Chrome only)
❏ Soap Dispenser*: 4503.115 (specify color)
❏ Trap:
* See faucet section for additional models available
Revised 8/02
SINGLE BOWL KITCHEN SINK
❏ 7143.803 3-Hole
❏ 7143.804 4-Hole
Product Features:
• Acid-resisting enameled steel
• Single bowl design
• Self-rimming installation
• Available in 3 or 4 faucet hole configurations
• Silicone sealant supplied
Nominal Dimensions: 635 x 559 x 184mm
(25" x 22" x 7-1/4")
Bowl sizes:
552mm (21-3/4") wide, 413mm (16-1/4") front to
back, 178mm (7") deep
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.4M for Enameled Steel Plumbing
Fixtures
ROUGHING-IN DIMENSIONS SHOWN ON REVERSE SIDE OF PAGE