Specification
K1-19
© 2017 AS America Inc.
spec_2786.128TropicRHel-1pc-withSeat Rev. 9/17
TROPIC
®
RIGHT HEIGHT
®
ELONGATED
ONE-PIECE TOILET WITH SEAT
VITREOUS CHINA
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ICC ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND
USABLE BUILDING FACILITIES-CHECK LOCAL CODES.
TROPIC
®
RIGHT HEIGHT
®
ELONGATED
ONE-PIECE TOILET WITH SEAT
❑ 2786.128
•LXP (Luxury Performance) Toilet
•12" (305 mm) rough-in
•Right Height elongated siphon action bowl with
smooth-sided, concealed trapway
•High efficiency, ultra-low consumption
(1.28 gpf/4.8 Lpf), utilizes 20% less water
•Meets EPA WaterSense
®
criteria
•EverClean
®
Surface
•PowerWash
®
rim scrubs bowl with each ush
•16-1/2" (419 mm) rim height for accessible
applications
•2" (51 mm) trapway
•3" (76 mm) ush valve
•Chrome trip lever matches Tropic faucets
•Includes Duroplast
™
slow-close seat and cover
with easy lift-off feature for simple removal and
reattachment for cleaning
•Includescolor-matchedDuroplastSlow
Close Toilet Seat and cover with easy lift-off
feature for simple removal and reattachment
for cleaning
•Two color-matched bolt hole covers
•10-year warranty
•Transitional design coordinates with Tropic
lavatories and faucets
•Best 1,000g MaP Flush score**
❑ 2786.813 Same as above except trip lever on
right hand side
❑ 5024A.65G Preferred Seat: Transitional
Elongated Luxury Seat
Nominal Dimensions:
756 x 424 x 778mm
(29-3/4" x 16-3/4" x 30-1/2")
Fixture only, supply by others
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.28/CSAB45.1
•USEPAWaterSense
®
Specication for HETs
C/L OF SEAT POST
HOLES 5-1/2"
(140mm) CENTERS
29-3/4"
(756mm)
8-1/8"
(206mm)
3/4"
(19mm)
18-1/2"
(470mm)
3-1/2"
(88mm)
8-1/2"
(217mm)
13-1/2"
(345mm)
14"
(354mm)
16-3/4"
(424mm)
30-1/2"
(778mm)
16-1/2"
(419mm)
12"
(305mm)
C/L OF OUTLET AND
TOILET MTG BOLTS
FINISHED WALL
IMPORTANT: Water supply on the wall is required at 3-3/4" or 9" from centerline of the toilet (see rough-in).
First suggested position is hidden behind the toilet. The geometry of the toilet gives space for this installation.
The second suggested position is next to the toilet. Between these two positions, the space for the supply
between wall and toilet is limited to 3-1/4". In this case, check your supply and hose dimensions.
FINISHED
FLOOR
2-7/8"
(74mm)
5-1/2"
(140mm)
SUPPLY AS
REQUIRED
(position 2)
SUPPLY AS
REQUIRED
(position 1)
6"
(152mm)
3-3/4"
(95mm)
9"
(229mm)
14"
(355mm)
OR
NOTES:
THISTOILETISDESIGNEDTOROUGH-INATAMINIMUMDIMENSIONOF
305MM(12")FROMFINISHEDWALLTOC/LOFOUTLET.
SUPPLYNOTINCLUDEDWITHFIXTUREANDMUSTBE
ORDEREDSEPARATELY.
*
DIMENSIONSHOWNFORLOCATIONOFSUPPLYISSUGGESTED.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
rangeoftoleranceestablishedbyANSIStandardA112.19.2
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
To Be Specied:
❑ Color: ❏ White ❏ Linen
❑ Supply with Stop:
**
Maximum Performance (MaP) testing performed by
IAPMO R&T Lab. MaP Report conducted by Gauley
Associates Ltd. and Koeller and Company.
BARRIER FREE
EVERCLEAN WATER
EFFICIENT
EPA
WATERSENSE
CERTIFIED