Dimensions Guide
L33
© 2016 AS America Inc.
Revised 1/16
MONTERREY
®
TWO-HANDLE CENTERSET LAVATORY FAUCET
RIGID/SWIVEL GOOSENECK SPOUT WITH 5" REACH
GENERAL DESCRIPTION:
Durable cast brass construction. 1/2" male threaded inlet
shanks with shank nuts and brass coupling nuts. 1/4 turn
ceramic disc valve cartridges. Field-convertible rigid/swivel
gooseneck spout. Choice of Vandal-Resistant Wrist Blade or
Lever handles with blue & red color indexes. All brass drain
body with 1 1/4" (32mm) tailpiece (on applicable models).
1.5 gpm/5.7L/min. maximum flow rate.
PRODUCT FEATURES:
Pressure Compensating Aerator: Provides a constant
water flow of 1.5 gpm throughout the pressure range.
Solid Brass Construction: Durable - Excellent in high
use applications. Ideal for prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance.
Field-Convertible Rigid/Swivel Spout: Easily adjusted
in the field.
Lead-Free: Faucet contains ≤ 0.25% total lead content by
weighted average.
7500.170 Shown
SUGGESTED SPECIFICATION:
4" centerset lavatory faucet shall be cast brass construction with shank nuts and brass coupling nuts. Shall feature
water-conserving 1.5 gpm/5.7L/min. pressure compensating aerator. Vandal-Resistant handles. Shall also feature 1/4 turn
washerless ceramic disc valve cartridges. Fitting shall be American Standard Model # 750_.1_0.002.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASME A112.18.1
CSA B 125
NSF 372
MODEL NUMBER:*
7500.170 Centerset Lavatory
1. 5 gpm Pressure Compensating Aerator. Rigid/swiv
el
gooseneck spout. Vandal-Resistant Wrist Blade handles.
Less drain and pop-up hole.
7502.170 Centerset Lavatory
1. 5 gpm Pressure Compensating Aerator. Rigid/swiv
el
gooseneck spout. Vandal-Resistant Wrist Blade handles
.
Grid strainer drain.
7500.140 Centerset Lavatory
1. 5 gpm Pressure Compensating Aerator. Rigid/swiv
el
gooseneck spout. Vandal-Resistant Lever handles. Less
drain and pop-up hole.
7502.140 Centerset Lavatory
1. 5 gpm Pressure Compensating Aerator. Rigid/swiv
el
gooseneck spout. Vandal-Resistant Lever handles. Gr
id
strainer drain.
7500.170
Product
Number
Description
Finish
7502.170
Polished
Chrome
002
7500.140
7502.140
57 mm
(2-1/4
"
)
127 mm
(5
"
)
171 mm
(6-3/4
"
)
46 mm
(1-13/16
"
)
32 mm
(1-1/4
"
)DIA.
MOUNTING
HOLES
273 mm
(10-3/4
"
)
148 mm
(5-13/16
")
22 mm (7/8
"
) DIA.
1/2 NPSM
51 mm
(2
"
)
35 mm
(1-3/8
"
)
MAX.
102 mm
(4
"
)
298 mm
(11-3/4
"
)
99 mm
(3-7/8
"
)
Gasket
Lever Handle
Centerset Lavatory with rigid/swivel gooseneck spout. 1.5 gpm/5.7L/min pressure compensating
aerator. Vandal-Resistant Wrist Blade Handles. Less drain and pop-up hole.
Centerset Lavatory with rigid/swivel gooseneck spout. 1.5 gpm/5.7L/min pressure compensating
aerator. Vandal-Resistant Wrist Blade Handles. Grid strainer drain.
Centerset Lavatory with rigid/swivel gooseneck spout. 1.5 gpm/5.7L/min pressure compensating
aerator. Vandal-Resistant Lever Handles. Less drain and pop-up hole.
Centerset Lavatory with rigid/swivel gooseneck spout. 1.5 gpm/5.7L/min pressure compensating
aerator. Vandal-Resistant Lever Handles. Grid strainer drain.
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
10080604020
MEET
S
THE AMERI
C
AN
S
WITH DI
S
ABILITIE
S
A
C
T
G
UIDELINE
S
AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND
USABLE BUILDING FACILITIES-CHECK LOCAL CODES
*PCA - Pressure Compensating
**Meets Cal Green Code
Other Aerators Available:
Part Suffix Description
LV15
V15
LV10
V10
V05**
V035**
1.5 gpm (5.7 Lpm) PCA Vandal-Resistant Non-Aerated Laminar Flow Outlet
1.5 gpm (5.7 Lpm) PCA Vandal-Resistant Aerator
1.0 gpm (3.8 Lpm) PCA Vandal-Resistant Non-Aerated Laminar Flow Outlet
1.0 gpm (3.8 Lpm) PCA Vandal-Resistant Aerator
0.5 gpm (1.9 Lpm) PCA Vandal-Resistant Multi-Laminar Spray
0.35 gpm (1.3 Lpm) PCA Vandal-Resistant Multi-Laminar Spray