User's Manual

M30
© 2008 AS America Inc.
Revised 8/05
To Be Specied:
❏ Gooseneck Spout: 7522.055
❏ Knee Action Mixing Valve: 7676.029
❏ Grid Drain: 7716.020
❏ Trap:
❏ Nipple:
❏ Painted Bracket Support: 485742-600 (2 req’d)
❏ Flex Tempered Supply (by others):
SURGEON’S
SCRUB SINK
VITREOUS CHINA
SURGEON’S SCRUB SINK
• Vitreous china
• Low front rim
• Wall hanger
• For wall hanger (included) or for
exposed bracket support [381mm (15")
painted brackets available]
❏ 9047.044 Faucet holes on 203mm (8") centers
❏ 9047.093 Single center faucet hole (Illustrated)
Nominal Dimensions:
711 x 559mm
(28" x 22")
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2 for Vitreous China Fixtures
Available in White Only
NOTES:
*
DIMENSION SHOWN FOR LOCATION OF “P” TRAP IS SUGGESTED.
15" PAINTED SUPPORT BRACKETS 485742-600 AVAILABLE AND MUST
BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
356mm
(14)
FINISHED WALL
1-1/2 O.D.
TAILPIECE
FINISHED FLOOR
711mm
(28)
914mm
(36)
356mm
(14)
T-7F HANGER
559mm
(22)
MIXING VALVE BODY
254mm
(10)
305mm
(12)
425mm
(16-3/4)
140mm
(5-1/2)
445mm
(17-1/2)
76mm
(3)
146mm
(5-3/4)
292mm
(11-1/2)
73mm
(2-7/8)
1-1/2 N.P.T..
WASTE OUTLET
127mm
(5)
C
L
76mm
(3)
76mm
(3)
76mm
(3)
C/L OF 3/8 N.P.T.
SUPPLIES
381mm (15) BRACKETS (485742-600)
TO BE ORDERED SEPARATELY
133mm
(5-1/4)
C/L OF
TEMP.
SUPPLY
25mm
(1)
*
457mm
(18)