Instructions / Assembly

- 2 -
770250-100
Furniture must be used with Townsend based sinks and quartz tops shown on first page. Other sinks and tops are not compatible with the furniture.
CAUTION: Risk of product damage. Siliconized acrylic caulk must be used to secure the furniture top to the furniture. Do not use 100% silicone
sealant as it could damage the furniture finish.
Prior to installation, unpack the furniture and associated accessories and inspect them for damage. Return the product to the protective carton until
you are ready to install it.
Refer to the appropriate sink, faucet, and drain documents for installation details. This document is specifically for the furniture installation only.
The furniture is designed to allow base moldings to pass behind them. However, any moldings that may inhibit the furniture from being flush
against the wall should be notched accordingly.
BEFORE YOU BEGIN:
American Standard Furniture Rough-In Dimensions
(see sink rough-ins for faucet and drain details)
Nominal Dimensions: 9036.030 Vanity or 9039.030 Washstand
with 0329 Series Townsend Above Counter Sinks and
7840.000.820 Quartz Top
American Standard Furniture Rough-In Dimensions
(see sink rough-ins for faucet and drain details)
Nominal Dimensions: 9036.030 Vanity or 9039.030 Washstand
with 0330.000 Townsend Under Counter Sinks and
7840.800.820 Quartz Top
American Standard Furniture Rough-In Dimensions
(see sink rough-ins for faucet and drain details)
Nominal Dimensions: 9036.030 Vanity or 9039.030 Washstand
with 0328 Series Townsend Pedestal Sinks
30"
(762 mm)
19-1/2"
(495 mm)
35-1/4"
(895 mm)
Vanity shown
(same as Washstand)
30"
(762 mm)
20"
(508 mm)
34"
(863 mm)
Vanity shown
(same as Washstand)
30"
(762 mm)
20"
(508 mm)
36-3/8"
(923 mm)
Washstand shown
(same as Vanity)