Specification

J23
© 2017 AS America Inc.
spec_0328-Townsend Ped Sink Rev. A 7/17
TOWNSEND
®
PEDESTAL SINK and OPTIONAL FURNITURE
FINE FIRECLAY
TOWNSEND
®
PEDESTAL SINK and OPTIONAL FURNITURE
Pedestal Sink and Leg Combinations:
❏ 0328.800 Faucet holes on 8" (203mm) centers (Illustrated)
❏ 0328.400 Faucet holes on 4" (102mm) centers
❏ 0328.100 Center hole only
 •Finereclay
 •Classicstyledrectangularpedestallavatory
 •Rearoverow
 •Suppliedwithmountingkit
 •RightHeight
®
forgreatercomfortduringuse
 •Faucetledgewithlargedeckarea(faucetnotincluded)
 •Pedestaltopscanalsobeusedwithdesignmatchedvanityor
washstand furniture
 •Design coordinates with Townsend
®
Collection
Bowl Size:
19" (485mm) wide,
12-3/4"(324mm)fronttoback,
5" (128mm) deep
Nominal Dimensions:
Pedestal Sink and Leg Combinations:
30" x 19-1/2" x 35-1/4" (762 x 495 x 895mm)
Pedestal Sink and Furniture Combinations:
30" x 19-1/2" x 35-7/8" (762 x 495 x 910mm)
❏ 0328.008 Pedestal top-8" (203mm) centers
❏ 0328.004 Pedestal top-4" (102mm) centers
❏ 0328.001 Pedestal top-center hole only
❏ 0039.001Pedestallegonly
❏ 9036.030 30" (762mm) vanity less drawer pulls
❏ 7760.000 Drawer pulls (set of 2) for 30" (762mm) vanity
❏ 9039.030 30"(762mm)washstandlesstowelbar
❏ 3749.000Towelbarfor30"(762mm)washstand
❏ 7720.018 Optional decorative p-trap drain
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.2/CSAB45.1
To Be Specied:
❏ Chinaware Color: ❏ White ❏ Linen
❏ Vanity Finish: ❏ White ❏ Smoked Grey
❏ Vanity Drawer Pulls Finish: ❏ Chrome ❏BrushedNickel
❏ Washstand Finish: ❏ White ❏ Smoked Grey
❏WashstandTowelBarFinish:❏ Chrome ❏BrushedNickel
❏ Faucet*:
❏ Supplies:
❏ P-Trap Finish: ❏ Chrome ❏BrushedNickel
*SeeTownsendfaucetsectionformodelsavailable
SEEREVERSEFORROUGHING-INDIMENSIONS
Townsend pedestal top sink 0328.008
shown with 9036.030 vanity
and 7760.000 drawer pulls
Townsend pedestal combination 0328.800