Manualshelf

Installation Guide

ManualsBrandsAmerican Standard ManualsFarmhouse Kitchen SinksDelancey Farmhouse Apron Front Cast Iron 33 in. 4-Hole Double Bowl Kitchen Sink in Brilliant White
1234567
740209-100 (9/18)
- 4 -
3
SINK INSTALLATION
PLACE A THIN LAYER OF SEALANT AROUND
TOP EDGE OF SUPPORT FRAME
4a
COUNTERTOP CUTOUT
DIMENSIONS BASED
ON "TEMPLET" OR SINK
DIMENSIONS BEING USED.
COUNTERTOP CUTOUT DIMENSIONS
BASED ON "TEMPLET" OR SINK
DIMENSIONS BEING USED.
Installing Countertop - Countertop Mount Installation
STEP 1. Carefully set the sink within the support frame and position in center of cabinet opening. If Countertop
mounted ensure that the sink bottom/underside rim surface is level and flush with the countertop top surface, (when
countertop is installed - reference Countertop Installation and 2A). If under mounted ensure that the sink top rim
is level and flush with cabinet top surface. Check clearance around sink apron and ensure sink is centered within
cabinet opening. Ensure sink base is making proper contact with support frame. Adjust or shim as needed to obtain
proper sink position and fit. (Reference Under Mount Installation and 2B.)
STEP 2. For Under Mount Installation: Carefully remove sink and place a thin layer of sealant around top edge of
support frame where the sink and frame will make contact. Then replace sink back into position. See diagram below.
Make sure there are no obstructions such as cabinets, plumbing, etc. below or above the counter top.
Countertop mount cutout opening is determined from the actual sink size or provided template. Place template
on countertop checking to make sure the sink will line up correctly with plumbing. Depending upon the material
used for the counter top, drill a hole on the inside of template, then cut along template using a suitable saw for
material being used. Note: Check the countertop cutout opening by placing the sink in the opening to be
sure it is sized correctly. The rim of the sink must be seated uniformly on the countetop and the bottom
of the sink should be sitting on the support frame to ensure the corners of the sink seat properly.
CAUTION: Sink is heavy. For personal safety, use extra person for assistance with installation.