Installation Guide

26 - EN -
If freezing weather or long term absence is
anticipated, drain the water.
If freezing in winter
The water in the SpaLet
®
seat may freeze and cause damage during winter or other times when the wa-
ter temperature is signifi cantly low.
Perform the following procedure to prevent freezing and related damage.
Do not disconnect the power plug from the outlet. Leave the power turned on. Turn off any active power
save function.
If the bathroom can be heated:
Refer to the "General Freezing Prevention Procedure" section.
If the bathroom cannot be heated:
Refer to the "Draining the Water to Prevent Freezing" section.
General Freezing Prevention Procedure
1. Set the [Seat Temp.] to “High” and close the toilet lid.
2. Turn off any active ECO function.
3. Heat the bathroom.
CAUTION
Make sure to follow one of the freezing prevention
procedures whenever there is a possibility of freezing.
* Damage from freezing may cause fi re or fl ooding.