Instructions / Assembly

16 - EN -
Press here
on seat
Confirm that the LED on the seat unit is lit.
1. Insert the power plug into the outlet.
2.Check the Back and Front
nozzle spray.
Follow the procedure below after the installation work has
been completed.
(1) Check the cleansing operation.
1) With your forearm resting on the toilet seat, press the
cleansing button.
The nozzle spray automatically stops two minutes
after the switch is turned on.
2) When the nozzle extends, cover the tip of the nozzle
with your hand to catch the spray.
3) Press the STOP button to stop the nozzle spray.
(2) Perform the same check using the
front nozzle spray function.
Power
plug
Operational Check