Installation Guide

28
a) Bidet Seat must be powered ON to clean
nozzle tip.
b) For side panel type, under non-seated
situation to clean nozzles manually, press
"Seat Temp" and "Water Temp" buttons at the
same time for over 2 seconds.
For remote type, under non-seated situation
to clean nozzles manually, press "Nozzle
Cleaning" button for over 2 seconds.
c) Grasp the nozzle tip and pull out. Use a soft
sponge to clean any accumulated debris.
Cleaning the Seat Unit Cleaning the Nozzles
Periodically, wipe off the seat unit with
a soft cloth dampened with water.
a) Ensure bidet is powered ON.
b) For side panel type, under non-seated situation to clean
nozzles manually, press "Seat Temp" and "Water Temp"
buttons at the same time for over 2 seconds.
For remote type, under non-seated situation
to clean nozzles manually, press "Nozzle
Cleaning" button for over 2 seconds.
c) Grasp the nozzle tips and pull out.
d) Push new tips onto the nozzle ends.
Changing Nozzle Tips
Maintaining This Product