Installation Guide

ManualsBrandsAmerican Standard ManualsTowel Bars8334.024.002

The WALL MOUNTED ACCESSORIES work best if secured to a wall stud or cross brace within the wall, using the SCREWS (2) supplied.

If the ACCEASAORY is to be installed on a tile or plaster wall the ANCHORS (3) and SCREWS (2) should be used.

Secure MOUNTING BRACKET (1) to wall with SCREWS (2)

Determine desired height and location (optional) and mark a center line. Make sure the centerline is level. Using the MOUNTING

BRACKET (1) as a template mark the two spots for the mounting holes. If MOUNTING BRACKET (1) is secured to a stud or cross

brace drill small pilot holes for SCREWS (2).

For installations on tiled walls or drywall, use TILE ANCHORS (3) and SCREWS (2) for securing MOUNTING BRACKET (1) to wall. Drill two

1/4" diameter holes a minimum of 1-1/4" deep. Insert the two TILE ANCHORS (3) ﬂush with face of ﬁnished wall. Place MOUNTING

BRACKET (1) over TILE ANCHORS (3) and insert SCREWS (2) provided with a ﬂat blade screwdriver. See illustration below.

M965369 REV. 1.1

INSTALLATION OF MOUNTING BRACKETS

FOR ALL WALL MOUNTED ACCESSORIES

Thank you for selecting American-Standard...the benchmark

To ensure that your installation proceeds smoothly--please

read instructions carefully before you begin.

Regular Screwdriver

Recommended Tools

Phillips Screwdriver

10'

Tape Measure

OPTIONAL TO

FINISHED FLOOR

OPTIONAL TO

FINISHED FLOOR

DRILL PILOT HOLE FOR

WOOD SCREW (2) OR

1/4" DIA. HOLE FOR

ANCHOR (3)

Installation

Instructions

TR SERIES

Traditional Round Accessories

CARE INSTRUCTIONS:

DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR

WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.

DO NOT: CLEAN THE PRODUCT WITH SOAPS, ACID,

POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH

WITH A COARSE SURFACE.

8334.018

8334.024

8334.190

8334.210

8334.230

18" TOWEL BAR

24" TOWEL BAR

TOWEL RING

DOUBLE ROBE HOOK

TOILET PAPER HOLDER

3/8" (9mm)

3/4" (19mm)

LEVEL

FINISHED WALL

Electric Drill

Level

4mm Hex wrench

Summary of content (3 pages)

PAGE 1
Installation Instructions TR SERIES Traditional Round Accessories 8334.018 8334.024 8334.190 8334.210 8334.230 18" TOWEL BAR 24" TOWEL BAR TOWEL RING DOUBLE ROBE HOOK TOILET PAPER HOLDER Thank you for selecting American-Standard...the benchmark To ensure that your installation proceeds smoothly--please read instructions carefully before you begin. M965369 REV. 1.
PAGE 2
TOWEL RING and ROBE HOOK INSTALLATION Refer to Step 1 for installation of MOUNTING BRACKET (2). Align accessory and place ACCESSORY ESCUTCHEON (1) onto MOUNTING BRACKET (2) Secure accessory with SET SCREW (3) using a 4mm HEX WRENCH (4). 2 1 FINISHED WALL 2 1 3 4 OPTIONAL TO FINISHED FLOOR 3 4 3 INSTALL TOILET PAPER HOLDER Refer to Step 1 for installation of MOUNTING BRACKETS (1). NOTE: The center line distance between the two MOUNTING BRACKETS is 6-1/2" (166mm).
PAGE 3
4 18" TOWEL BAR INSTALLATION Refer to Step 1 for installation of MOUNTING BRACKETS (1). NOTE: The center line distance between the two MOUNTING BRACKETS is 18" (457.2mm). Make sure the two MOUNTING BRACKETS (1) are level. Install the ACCESSORY ESCUTCHEONS (2) on the MOUNTING BRACKETS (1). Secure ACCESSORY ESCUTCHEONS (2) with SET SCREW (3) using a 4mm HEX WRENCH (4). FINISHED WALL 1 2 18 " (457.2mm) 24 " (609.