Installation Guide

M965367 REV. 1.1
TOWEL RING and ROBE HOOK INSTALLATION
2
Refer to Step 1 for installation of MOUNTING BRACKETS (2). Align accessory and place ACCESSORY ESCUTCHEON (1) onto
MOUNTING BRACKET (2). Secure accessory with SET SCREW (3) using a 4mm HEX WRENCH (4).
INSTALL TOILET PAPER HOLDER
3
LEVEL
2
3
4
3
4
1
1
OPTIONAL TO
FINISHED FLOOR
FINISHED WALL
2
1
3
4
4
Refer to Step 1 for installation of MOUNTING BRACKETS (1). NOTE: The center line distance between the two
MOUNTING BRACKETS is 6-1/2" (166mm). Make sure the two MOUNTING BRACKETS (1) are level.
Install the ACCESSORY ESCUTCHEONS (2) on the MOUNTING BRACKETS (1). Make sure the ACCESSORY ESCUTCHEONS (2) with
holes for the horizontal shaft are facing inward. Secure ACCESSORY ESCUTCHEONS (2) with SET SCREW (3) using a 4mm HEX WRENCH (4).
Install the PAPER HOLDER SHAFT (5) into the mounted ACCESSORY ESCUTCHEONS (2).
2
5
3
4
1
OPTIONAL TO
FINISHED FLOOR
FINISHED WALL
2
6" (153mm)