Installation Guide

ManualsBrandsAmerican Standard ManualsPlumbingExposed Yoke 2-Handle Wall-Mount Utility Faucet with Top Brace in Polished Chrome

Exposed Wall Mount

Sink Faucet with Top Brace

ROUGHING-IN DIMENSIONS

M965049 Rev. 1.3

Certiﬁed to comply with ANSI A112.18.1M

8344.012.002

8344.012.004

ROUGH-IN

Prepare water supply lines per "Roughing-in

Dimensions". Install 1/2" NPT. SUPPLY NIPPLES

Installation

Instructions

Plumbers' Putty or Caulking

Adjustable Wrench

Phillips Screwdriver

Channel Locks

RECOMMENDED TOOLS

Thank you for selecting American-Standard...

the benchmark of ﬁne quality for over 100 years.

To ensure that your installation proceeds smoothly--

please read these instructions carefully before you begin.

2-1/2"

(63mm)

3/4" HOSE

TREADS

(203mm)

9-3/8"

(237mm)

(152mm)

HOT

COLD

BACKFLOW

PREVENTER

12-1/2"

(317mm)

1/2 N.P.T.

FEMALE

2-3/8"

(60mm)

1/8"

(3.2mm)

7-3/4" REF.

(198mm)

WALL

SUPPORT

FINISHED WALL

1/2 NPT. FEMALE THREADS

FINISHED WALL

1/2 NPT. SUPPLY NIPPLE

1/2 to 1

1-1/4 DIA. OPENING

ECCENTRIC

Summary of content (3 pages)

PAGE 1
Exposed Wall Mount Sink Faucet with Top Brace Installation Instructions 8344.012.002 8344.012.004 Thank you for selecting American-Standard... the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin. Certified to comply with ANSI A112.18.1M M 9 6 5 0 4 9 R ev. 1.
PAGE 2
FINISH INSTALLATION Slide COUPLING NUTS (5) onto INLET SHANKS (3). Thread ESCUTCHEONS (2) fully onto INLET SHANKS (3). Thread INLET SHANKS (3) onto SUPPLY NIPPLES (1). Distance between INLET SHANK (3) outlets must be 8" to match the VALVE. Insert RUBBER WASHERS (4) into INLET SHANK (3). Attach VALVE (6) to INLET SHANKS (3). Tighten both COUPLING NUTS (5) firmly.
PAGE 3
Exposed Wall Mount Sink Faucet with Top Brace MODEL NUMBER 8344.012.002 8344.012.