Installation Guide

ManualsBrandsAmerican Standard ManualsPlumbingExposed Yoke Wall Mount 2-Handle Utility Faucet in Polished Chrome with Offset Shanks and Adjustable Rough-In

Exposed Wall Mount

Sink Faucet with Top Brace

ROUGHING-IN DIMENSIONS

M 9 6 5 0 3 9 R E V. 1.2 (11/14 )

Certiﬁed to comply with ANSI A112.18.1M

8354.112.002

8354.112.004

ROUGH-IN

Prepare water supply lines per "Roughing-in

Dimensions". Install 1/2" NPT. SUPPLY NIPPLES

Installation

Instructions

Plumbers' Putty or Caulking

Adjustable Wrench

Phillips Screwdriver

Channel Locks

RECOMMENDED TOOLS

Thank you for selecting American-Standard...

the benchmark of ﬁne quality for over 100 years.

To ensure that your installation proceeds smoothly--

please read these instructions carefully before you begin.

FINISHED

WALL

1/2 NPT.

FEMALE

THREADS

1/2 NPT.

SUPPLY NIPPLE

1-1/4 DIA..

OPENING

1/2 to 1

2-1/2"

(63mm)

(203mm)

3/4" HOSE

TREADS

9-3/4"

(248mm)

OFFSET

SHANKS

MAX. 10" (254mm)

MIN. 6" (152mm)

HOT

COLD

BACKFLOW

PREVENTER

12-1/2"

(317mm)

1/2 N.P.T.

FEMALE

2-3/8"

(60mm)

6-3/8"-8-3/8" REF.

(163-213mm)

WALL

SUPPORT

FINISHED WALL

Summary of content (3 pages)

PAGE 1
Exposed Wall Mount Sink Faucet with Top Brace Installation Instructions 8354.112.002 8354.112.004 Thank you for selecting American-Standard... the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin. Certified to comply with ANSI A112.18.1M M 9 6 5 0 3 9 R E V. 1.
PAGE 2
FINISH INSTALLATION Apply thread sealant or teflon tape to SUPPLY NIPPLES (1). Thread ESCUTCHEONS (2) fully onto INLET SHANKS (3). Thread INLET SHANKS (3) onto SUPPLY NIPPLES (1). Distance between INLET SHANK (3) outlets must be 8" to match the VALVE. Insert RUBBER WASHERS (4) into COUPLING NUTS (5). Attach VALVE (6) to INLET SHANKS (3). Tighten both COUPLING NUTS (5) firmly.
PAGE 3
Exposed Wall Mount Sink Faucet with Top Brace MODEL NUMBER 8354.112.002 8354.112.