Installation Guide

ROUGHING-IN DIMENSIONS
Turn off hot and cold water
supplies before beginning.
CAUTION
INSTALL WALL SUPPLY
WALL SUPPLY (1) is 1/2" NPT. See rough-in above for detailed information.
Install O-RING (2) onto back of WALL SUPPLY (1).
Apply sealant or teflon tape to threads of 1/2" NPT supply nipple. Tighten ELBOW (1) onto the
inlet pipe nipple with a smooth jaw wrench. WALL SUPPLY (1) should be tight against finished wall.
1
1/2" NPT
APPLY SEALANT
OR TEFLON TAPE
1/2" NPT
APPLY SEALANT
OR TEFLON TAPE
Installation
Instructions
Certified to comply with ANSI A112.18.1
Recommended Tools & Materials
Thank you for selecting American-Standard...the benchmark
of fine quality for over 140 years.
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
M965269 Rev.1.1 (12/18)
Pencil
10'
Tape Measure
Sealing Tape
20.5mm
(13/16")
35mm
(1-3/8")
49.5mm
(1-15/16") SQ.
13mm
(1/2")
1/2" NPT
O-RING GASKET
FINISHED WALL
1/2" NPSM HOSE
CONNECTION
30.5mm
(1-3/16")
(48" - 60")
(OPTIONAL)
TO FINISHED
FLOOR
20.5mm
(13/16")
32mm
(1-1/4")
57mm
(2-1/4") DIA.
50mm
(2") DIA.
13mm
(1/2")
1/2" NPT
O-RING GASKET
FINISHED WALL
1/2" NPSM HOSE
CONNECTION
35mm
(1-3/8")
(48" - 60")
(OPTIONAL)
TO FINISHED
FLOOR
(48" - 60")
(OPTIONAL)
TO FINISHED
FLOOR
SHOWER SYSTEM ACCESSORIES
8888.068
8888.069
2
1
1
Adjustable Wrench
2
(48" - 60")
(OPTIONAL)
TO FINISHED
FLOOR
8888.068
8888.069
1660.145
8888.035
8888.068
8888.069
8888.035
1660.147
1660.145
1660.144
1660.144/147